Power Supply
The Silent Bass can be operated with either battery or AC power. Always turn the power switch on the rear panel OFF before making AC power connections or replacing the battery.
■Using the Battery
1Open the battery case located on the backside of the instru- ment by pulling the tab labeled “OPEN” toward you, then open the battery compartment cover.
2Insert the supplied battery
3Close the battery compartment cover and push the battery case all the way back into the instrument body.
* For customers in the Netherlands
Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA.
battery compartment cover
6F22
9V battery
battery compartment
When the battery is low, the lamp will dim and the sound may become distorted or noisy.
When these symptoms occur, please take note of the following precautions and replace the battery.
•When replacing the battery, please purchase a replacement battery that is the same type as the sup- plied battery (make sure the size and dimensions, plus the terminal design are the same). Depending upon the manufacturer, designs may differ slightly. A different type of battery may be difficult to insert into the battery case and may result in damaging the instrument. Also, even if the battery can be inserted, its use may result in fire, poor operation, etc. due to poor contact with the battery terminals.
•Always follow the +/– signs when inserting the battery. Improper insertion may result in fire.
•To prevent possible damage to the unit due to battery leakage and unnecessary power drain, remove the battery from the unit when it is not going to be used for an extended period of time.
■Supplying AC Power
AC adaptor is optional, please purchase the optional power adaptor
1 Plug the adaptor’s DC output cable into the Silent Bass’s DC IN 12V jack located on the back of the instrument, making sure the plug is firmly inserted into the jack.
2 Plug the AC adaptor into a convenient wall AC power socket.
•Battery power is automatically disconnected when the AC adaptor is connected.
•When the AC adaptor is used, the batteries may leak. To prevent leakage we recommend that you remove the batteries from the instrument.
•When using an AC adaptor, make sure you use only the appointed compatible adaptor. The use of an incompatible adaptor may result in damage to the instrument or cause fire, etc. Please use with caution.
13