Zephyr manual Read and Save These Instructions, Model AK8000AS, AK8100S, AK8200S

Page 1

Use, Care and Installation Guide

Read all Instructions before Installing and operating this appliance

Important Safety Notice

MODEL: AK8000AS, AK8100S, AK8200S

READ AND SAVE THESE INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE CONTROL DEVICE.

WARNING

TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

a.Use this unit only in the manner intended by the manufacturer, if you have questions, contact the manufacturer.

b.Before servicing or cleaning unit, switch power off at service panel and lock panel

to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

CAUTION

For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. Take care when using cleaning agents or detergents.

Suitable for use in household cooking area.

WARNING

TO REDUCE THE RISK OF RANGE TOP GREASE FIRE:

a.Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

b.Always turn hood ON when cooking at high heat or when flaming food

c.Clean ventilating fans frequently. Grease should not be allowed to accumulate

on fan or filter.

d.Use proper pan size. Always use cookware appropriate for the size of the surface element.

e.Keep fan, filters and grease laden surfaces clean.

f.Use high setting on hood only when necessary.

g.Don’t leave hood unattended when cooking.

h.Always use cookware and utensils appropriate for the type of and amount of food being prepared.

WARNING

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP FIRE, OBSERVE THE FOLLOWING:

a.SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

b.NEVER PICK UP A FLAMING PAN – You may be burned.

c.DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.

JAN07.0201

www.zephyronline.com

Important Safety Notice

Read and save these instructions

d.Use an extinguisher ONLY if:

1.You know you have a Class ABC extinguisher, and you already know how to operate it.

2.The fire is small and contained in the area where it started.

3.The fire department is being called.

4.You can fight the fire with your back to an exit

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

a.Installation work and electrical wiring must be done by qualified person (s) in accordance with all applicable codes and standards. Including fire-rated construction.

b.Sufficient air is needed for power combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

c.When cuttig or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

d.Ducted fans must always vent to the outdoors.

e.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application and be connected to a GFCL (Ground Fault Interrupter protected branch circuit).

g.NEVER place a switch where it can be reached from a tub or shower.

h.Make sure the power is off before installing, wiring or maintenancing.

WARNING

TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

CAUTION

To reduce risk of fire and to properly exhaust air outside - Do not vent exhaust air into spaces within walls, ceilings, attics, crawl spaces or garages.

WARNING

TO REDUCE THE RISK OF SHOCK, THIS FAN MUST BE INSTALLED WITH AN ISOLATING WALL CONTROL/SWITCH.

OPERATION

Always leave safety grills and filters in place. Without these components, operating blowers could catch onto hair, fingers and loose clothing.

*NOTE: Please check www.zephyronline.com for revisions before doing any custom work.

Image 1
Contents Model AK8000AS, AK8100S, AK8200S Read and Save These InstructionsMount Heights InstallationUse Metal ductwork only Ducting SpecificationsTwister AK8000AS Some Ducting OptionsTornado 2 unit AK8200S Tornado 1 unit AK8100SInstallation Controls & Features AK8100S/AK8200S Installation Controls & FeaturesControls & Features AK8000AS ElectricalCleaning AK8100S, AK8200S MaintenanceCleaning AK8000AS Surface Maintenance AK8000AS, AK8100S, AK8200SReplacing Light Bulbs Lights

AK8100S, AK8000AS, AK8200S specifications

The Zephyr AK8200S, AK8100S, and AK8000AS are part of Zephyr's innovative range of range hoods designed to enhance kitchen ventilation while adding a touch of modern elegance to any culinary space. Known for their powerful performance, these models incorporate advanced technologies that improve air quality and functionality.

The AK8200S is a premium option that combines striking design with potent efficiency. It features a powerful 600 CFM blower, which ensures rapid removal of smoke, steam, and odors. The model is equipped with a sophisticated multi-speed control system, allowing users to adjust the airflow according to their cooking needs. Additionally, the AK8200S boasts dual-level LED lighting, providing excellent illumination over the cooking area while being energy-efficient. The stainless steel design with seamless edges gives it a sleek, contemporary look that fits seamlessly into modern kitchens.

The AK8100S is another exceptional model, known for its versatility and user-friendly features. This range hood also offers a robust 600 CFM blower and comes with a four-speed fan control. The baffle filters are dishwasher-safe, making maintenance effortless. The AK8100S is designed with a streamlined body, enabling it to blend beautifully with cabinetry and countertops. Its stainless steel finish adds durability and ease of cleaning, while the ambient lighting enhances visibility during cooking.

The AK8000AS is a more compact yet powerful option, ideal for smaller kitchens that require a balance of performance and space-saving design. This model operates at a maximum of 600 CFM and features three fan speeds for customizable ventilation. Its minimalist design is accentuated by easy-to-use controls and a chic stainless steel exterior. Despite its smaller size, the AK8000AS does not compromise on functionality, offering effective smoke and odor removal with quiet operation.

Each of these models is designed using advanced technologies such as noise reduction systems, ensuring that kitchen environments remain comfortable even during heavy cooking sessions. With easy installation and stylish aesthetics, the Zephyr AK8200S, AK8100S, and AK8000AS provide homeowners with robust solutions for air quality management, combining form and function in any kitchen setting. Whether you are an aspiring chef or a casual cook, these range hoods deliver the performance and design needed for an exceptional cooking experience.