Heatiator T4800 manual Listings and Code Approvals, Description of the Fireplace System

Page 4

T4800 INSTALLATION INSTRUCTIONS

A. LISTINGS AND CODE APPROVALS

This fireplace system has been tested and listed in accordance with UL 127 standards, and has been listed by Underwriters Laboratories Inc. for installation and operation in the United States as described in this manual.

This fireplace has been tested and listed for use with the optional components listed on page 5. These optional components may be purchased separately and installed at a later date. However, installation of an outside air kit will require significant reconstruction, and should be installed at the time of the initial fireplace installation.

Check with your local building code agency prior to installing this fireplace to ensure compliance with local codes, including the need for permits and follow-up inspections. If you need assistance during installation, please contact your local dealer or the Heatilator Technical Services Department, Hearth Technologies Inc., 1915 W. Saunders St., Mt. Pleasant, Iowa 52641 (1-800-843-2848).

Heatilator® is a registered trademark of Hearth Technologies Inc., Division, HON INDUSTRIES.

WARNING!

This fireplace and its components are designed to be installed and operated as a system. Any alteration to or substitution for items in this system, unless allowed by these installation instructions, will void the Underwrit- ers Laboratories listing and may void the product warranty. It may also create a hazardous installation. Read through these instructions thoroughly before starting your installation and follow them carefully throughout your project.

B. DESCRIPTION OF THE FIREPLACE SYSTEM

1.The Heatilator fireplace system consists of the following:

a.Fireplace/Integral Grate/Outside Combustion Air System

b.Refractory

c.Chimney Termination Cap

d.Chimney System

e.Hearth Extension

2.Optional Components Include:

a.Glass Doors

b.Chimney Air Kit

NOTE: Illustrations used throughout these instructions reflect “typical installations” and are for design pur- poses only. Actual installation may vary slightly due to individual design preferences. However, minimum and maximum clearances must be maintained at all times.

The illustrations and diagrams used throughout these installations instructions are not drawn to scale.

Figure 1 - Typical Fireplace System

34922 Rev B

4

12-01

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 12-01 Rev B Table of Contents Safety PrecautionsDesign and Installation Considerations Listings and Code Approvals Description of the Fireplace SystemHeatilator fireplace system consists of the following Optional Components IncludeSystem Components Fireplace ComponentsChimney Components AK14 Outside Air KitChimney Sections Firestop SpacerChase Top Chimney Air Kit PRE-INSTALLATION Preparation Installation Along a Wall or an Exterior ChaseCorner Installation Fireplace Locations and Space RequirementsFraming the Fireplace Sidewalls/SurroundsOffset/Returns Offset Chart Using Offsets and ReturnsChimney Requirements Chimney Height Requirements above roof line Number of Sections RequiredInstallation of Fireplace Positioning the FireplacePlacing the Protective Metal Hearth Strips Leveling the FireplaceInstalling Firestop Spacers Assembling Chimney SectionsAttic Insulation Shield Double-checking the Chimney AssemblySecuring the Chimney System Installing the Roof Flashing Installing the Outside Air KitInstalling the Chimney Air Kit Marking the Exit Point of the RoofCompletion of the Enclosure Gas Log/Lighter ProvisionsHearth Extension Factory Built Hearth ExtensionPosition the Hearth Extension Finishing MaterialMantel Glass DoorsConstructing a Chase MaterialsChase Top Termination CapGeneral Information Outside Air Operating InstructionsFlue Damper Glass Doors Wood Fuel GrateFirescreen Proper Operating Positions of Bi-Fold DoorsDraft Problems Starting a FireFlue Draft Maintenance Instructions Chimney CleaningDisposal of Ashes Creosote and SootIndex Limited Warranty As part of its Limited WarrantyReplacement Parts Advantage How to Obtain Service

T4800 specifications

The Heatiator T4800 is an advanced heating solution designed to deliver exceptional performance and efficiency for residential and commercial spaces. This state-of-the-art heater combines innovative technologies with user-friendly features to ensure a comfortable atmosphere, regardless of the external weather conditions.

One of the standout features of the Heatiator T4800 is its powerful heating capacity. It can rapidly warm up large areas, making it ideal for open-plan living spaces and office environments. The unit employs a highly efficient heating element that ensures an even distribution of warmth, eliminating cold spots and enhancing overall comfort.

In terms of technology, the Heatiator T4800 integrates smart thermostatic controls. Users can easily set their desired temperature through a digital interface, allowing for precise adjustments. Additionally, the heater offers a programmable timer that lets users schedule heating cycles based on their routines, ensuring energy is not wasted when spaces are unoccupied.

Safety is paramount in the design of the T4800. It comes equipped with advanced features such as overheat protection and tip-over switches, which automatically cut off power to the unit if it becomes too hot or is inadvertently knocked over. This provides peace of mind, especially in households with children or pets.

Energy efficiency is another hallmark of the Heatiator T4800. The heater boasts a high Energy Efficiency Ratio (EER), which translates to significant savings on energy bills. Its environmentally friendly heating technology minimizes carbon emissions, making it a sustainable choice for environmentally conscious consumers.

The sleek and modern design of the Heatiator T4800 allows it to blend seamlessly with any décor. With a compact form factor, it can be placed nearly anywhere without taking up valuable space. Its whisper-quiet operation means it won’t disrupt daily activities or sleep, making it suitable for bedrooms, living rooms, and offices alike.

Moreover, the Heatiator T4800 is designed for easy maintenance. The accessible filter can be cleaned or replaced with minimal effort, ensuring optimal performance and longevity.

Overall, the Heatiator T4800 stands out in the crowded market of heating devices. Its combination of advanced features, efficiency, safety, and modern design makes it an outstanding choice for anyone looking to improve their indoor comfort.
Top Page Image Contents