Korg AX5G, AX5B manual Assigning the Expression Pedal to Volume, Wah, or FX Param

AX5-Series EasyStart

Quick Assign - Assigning a specific effect parameter to the Expression Pedal

The AX5’s expression pedal can be set to control volume, wah, and many effects parameter like the speed of the tremolo or depth of a reverb. Assigning an effect parameter to the expression pedal using the quick assign feature is easy:

1.First choose an effect type by turning the Function Selector to the appropriate effect section. Let’s choose Delay/REV.

2.Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select an effect. In this case, let’s go with F4 (PP delay).

3.Turn the Function Knob clockwise one position to PARAM. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “P2” (Feedback).

Note:	You should notice that the Program Down Switch led is blinking. This is the indication that you can assign this
	particular parameter (Feedback) to the expression pedal. You can’t use the expression pedal to control a parameter
	for which the Program Up or Program Down switches do not blink.

4.Hold down the Assign button for about 1 second. The display will read “CP”. You have now successfully assigned the Feedback of the PP Delay to the expression pedal.

Assigning the Expression Pedal to Volume, Wah, or FX Param

To switch the expression pedal between control of Volume, Wah, or FX Param, just press the pedal setting switch (Assign button) to scroll though the 3 choices: Volume, Wah, and FX PARAM.

Note:	Each time you press this button the control target will change in this order. Vol, Wah, FX PARAM.
	The LED will light as follows:
	Orange for Volume
	Red for Wah
	Green for FX PARAM

4