Connections and System Controls, Power Section

CTRL-SIX - EN

Connections and System Controls

Power Section

1)POWER SOURCE SELECTOR switch: This switch alternates the unit between the OFF position and ON position. When set to OFF, the unit is powered off. To turn the unit ON, select one of two pos- sible power sources corresponding to which you intend to use to power the device, namely ADAPTOR for the DC power adaptor, and USB cable for a USB connection with a computing device.

1a) 5V DC INPUT: To power your unit using an adaptor, connect a 5V 1000 mA DC adaptor to the device and a power source, then select ADAPTOR on the POWER SOURCE SELECTOR (1) switch.

1b) USB INPUT: To power your unit using the included USB cable, connect the adapter to the device and a USB slot on a computing device powerful enough to supply the unit, then select USB on the POWER SOURCE SELECTOR (1) switch.

1c) POWER LED: When connected to a power source and turned on properly, the POWER LED will illuminate to indicate that the unit is on.

2)GROUNDING SCREW: If you intend to use a turntable, you will need to ground the RCA cable(s) by screwing in the grounding fork(s) to the GROUNDING SCREW located on the rear panel of the mixer.

Input Section

3)CONVERTIBLE LINE / PHONO RCA INPUT: The unit has a CONVERTIBLE LINE/ PHONO RCA INPUT that accepts a standard dual L & R RCA connection.

3a) PHONO/ LINE switch: This small switch allows you to convert the RCA input connection between a PHONO (turn- table) input or a LINE level (MP3,CD, cassette deck, etc..) input. When switched to the PHONO position, you may use any turntable with a magnetic cartridge. Remember to connect your ground wire (see GROUNDING SCREW) or there may be a system hum.

4)MIC input: The MIC input is located at the front right hand corner of the unit and has an XLR jack (4a) for balanced op- eration and a 1/4” jack (4b) for unbalanced operation. You can control the gain for the mic (See CONTROLS ) below.

Output Section

5)STEREO RCA OUTPUT: The OUTPUT section of the unit contains three different L/R RCA outputs: REC, MASTER and BOOTH. The MASTER RCA output connects the unit to your main amplifier using standard audio cables with RCA- type connectors. The RECORD RCA output can be used to connect the mixer to the record input of your recording unit, thus enabling you to record your mix with RCA cables. The

BOOTH RCA output can be used as an output source for monitors or booth playback.

6)BALANCED XLR OUTPUT: The BALANCED OUTPUT section has LEFT and RIGHT XLR outputs for balanced op- eration of stereo outputs.

6a) XLR BASS LEVEL control: The XLR BASS LEVEL control adjusts the amount of bass for the XLR OUTPUT. 6b) XLR MASTER LEVEL control: The XLR MASTER LEVEL control adjusts the level of the signal for the XLR

OUTPUT.

7)HEADPHONE OUTPUT: The HEADPHONE OUTPUT located at the left corner on the front of the unit will accept any headphone with a standard 1/4” (HEADPHONE 1) or 1/8” (HEADPHONE 2) connector and or adaptor and will al- low you to CUE your music program before you play it, you can adjust the volume and PGM mix of the HEADPHONE (see CONTROLS) below.

Controls

*Note: Some of the following functions appear on the unit twice, how- ever they are explained only once because they operate in the same manner on each channel respectively.

8)HEADPHONE VOLUME rotary knob: The HEADPHONE VOL- UME rotary knob adjusts the overall volume of the headphone device connected to the HEADPHONE (7) output section. The volume is increased by rotating the knob clockwise, and it is de- creased by turning the knob counter-clockwise.

9)MASTER VOLUME rotary knob: The MASTER VOLUME ro- tary knob adjusts the overall volume of the units output.

10)CHANNEL ROTARY GAIN: The CHANNEL ROTARY GAIN allows you to increase the signal of each individual channel by turning the knob clockwise. The channels signal is lowered when the knob is turned counter-clockwise.

11)CHANNEL VOLUME FADER: The CHANNEL VOLUME FAD- ER alternates the volume of the corresponding channel between the maximum allowable level and 0.

12)VU METER: The CTRL-SIX has a stereo VU METER that al- lows you to monitor the decibel levels of the OUTPUT section.

USB/LINE TOGGLE (12a): Toggles between the LINE input or

USB signal for playback and control.

13)MIC VOLUME rotary knob: The MIC VOLUME rotary knob ad- justs the overall volume of the microphone connected to the MIDI MIC (3) input section. Turning the knob clockwise increases the volume, and it is decreased by turning the knob counter-clockwise.

14)CROSS FADER: The CROSS FADER allows you to toggle and mix playback between the two channels.

15)3-BAND EQUALIZER: The 3-BAND EQUALIZER adjusts the tone of each channel by giving you three frequency-bands to ad- just, from LOW, MIDRANGE (MID) and HIGH. You can use the

8 Connections and System Control

Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen

CTRL-SIX specifications

Gemini CTRL-SIX is an innovative device that seamlessly combines advanced technology with user-friendly features tailored for various applications. Primarily designed for professionals seeking efficiency and flexibility, the CTRL-SIX is a versatile tool that stands out in the market for its cutting-edge characteristics.

One of the standout features of Gemini CTRL-SIX is its lightweight and compact design, making it easily portable for users on the go. Its ergonomic layout ensures comfort during extended use, which is crucial for professionals who depend on their tools daily. The robust construction not only enhances durability but also signifies that the CTRL-SIX is built to withstand the rigors of various environments, from fieldwork to office settings.

Equipped with an intuitive interface, the CTRL-SIX allows users to navigate its functionalities with ease. The touchscreen display is responsive and offers clear visibility, improving user experience significantly. The device also supports customizable settings, enabling users to tailor the functionality to their specific needs, enhancing productivity and efficiency.

In terms of technology, Gemini integrates advanced connectivity options into the CTRL-SIX, including Bluetooth and Wi-Fi capabilities. This enables seamless integration with other devices and platforms, allowing users to share and access data easily. Whether for real-time collaboration or remote operation, the CTRL-SIX adapts to the user's workflow effortlessly.

Another notable aspect of Gemini CTRL-SIX is its powerful processing capabilities. With a high-performance processor, the device can handle demanding applications, making it suitable for various industries, including healthcare, construction, and engineering. Coupled with ample storage options, users can maintain a vast library of essential applications and documents without the fear of running out of space.

Battery life is a critical consideration for professionals, and Gemini has equipped the CTRL-SIX with an impressive battery that provides extended usage on a single charge, minimizing downtime. Moreover, it supports fast charging technology, ensuring users can quickly recharge the device when needed.

With its combination of portability, user-friendly interface, advanced connectivity, and robust performance, Gemini CTRL-SIX is a reliable tool designed to meet the evolving demands of modern professionals. This device not only enhances productivity but also fosters a level of versatility that is crucial in today’s fast-paced work environments.