Writing User Programs

PX3

∙After you finish editing, press the right Edit button till you see the word, “WRITE”. If you want to change the program location number, turn the Value Dial to the location of choice. Press the Bypass/Tune button and your new program will be saved, the LCD screen will indicate “COMPLT” for one second.

∙Press the EXIT button to return to the Program play mode.

∙Press the +/- buttons to change programs.

Reloading the Factory Pre-set Programs

∙1 - Power OFF

∙2 - Hold down the Rhythm/AUX button and the (+) button. While holding down both buttons, turn (ON) the power. The display will read (RELOAD?).

∙3 - Press the Bypass/Tune button, the factory pre-sets will be reloaded into the User program area.

∙If you decide not to (RELOAD?), press the +/- button. The Factory programs will not be reloaded in the User program area.