MATRIX-600 REAR PANEL CONTROLS & CONNECTORS
1. LOUDSPEAKER OUTPUTS – RIGHT and LEFT: Connect to right and left speakers accordingly. Use only speakers supplied with the system. The Matrix-600 is equipped with combo output connectors which accept both Speakon™ and 1/4” plug speaker cables for flexibility. The Matrix-600 comes includes a pair of 20’ high quality speaker cables with 1/4” plugs. We encourage you to upgrade these speaker cables to cables with Speakon™ connectors on both ends. The speaker cables must have a standard connection, (1-) connected to ground and (1+) connected to output.
2. PREAMP OUTPUTS L/R: These 1/4” TRS Jack outputs could be used to connect the mixer of the Matrix-600 to an external sound system, includ- ing connections to a mixer, preamp or power amplifiers. This provides you the flexibility of using the Matrix- 600 with an existing sound system. The power amplifier built-in to the Matrix-600 will automatically discon- nect. Make sure your external sound system is OFF before making such a connection.
3. POWER AMP INPUTS L/R: Use these 1/4” TRS Jack inputs to connect the power amplifier of the Matrix-600 system to an external source, such as an outboard audio mixer. This connection will automatically discon- nect the amplifiers from the rest of the unit. The signal from the front panel of the Matrix-600 mixer will not be routed to the amplifiers. Make sure the Matrix-600 is turned OFF and the external sound source’s level is set to zero before making such a connection.
4. MONITOR OUTPUT: Use this 1/4” TRS Jack output to connect a powered monitor (or a power amplifier with a passive monitor) to your Matrix-600 system. You can control the overall level of the MONITOR output, the level of effects mixed to the MONITOR output, as well as the individual channels levels going to the MONITOR output with the corresponding controls on the mixer.
5. RECORD OUTPUT: Connect these stereo