ETI Sound Systems, INC LHER20, LHEC30, LHEC20 specifications MATRIX-600 Features at a Glance

The MATRIX-600: Features at a Glance

Mixer:

nSeven channels tailored for flexibility in applications such as Home Entertainment, Mobile DJ, Karaoke, Nightclub and Bar Installation

nFour channels (Ch. 1-4) with balanced, combo 1/4” & XLR MIC inputs & balanced 1/4” jack line level inputs

v48Vdc phantom power on balanced combo 1/4” & XLR inputs for condenser microphones

vPhantom power can be switched on/off separately on two pairs of inputs vThe phantom power on/off switches are securely recessed behind the

front panel to avoid accidentally switching them on/off

vPAN, 3-band EQ, MONITOR LEVEL and EFFECT LEVEL controls on each channel

nStereo input channel (Ch. 5) with high impedance 1/4” stereo input can also be used for mono acoustical instruments with a pick-up or as an extra MIC using the combo 1/4” & XLR connector

vStereo 1/4” input with a high Z input impedance to connect variety of sources

vCombo 1/4” & XLR inputs to connect either mono acoustic instrument with a pick-up via the unbalanced 1/4” connector or low impedance dynamic MIC via the balanced XLR connector

vPAN/BALANCE, 3-band EQ, MONITOR LEVEL and EFFECT LEVEL controls

nStereo input channel (Ch. 6) for stereo sources

vDual stereo inputs with 1/4” TRS and 3.5mm mini-jack to connect any 2-channel stereo source

v3-band EQ, MONITOR LEVEL and EFFECT LEVEL controls

nHOUSE input with stereo RCA connectors and a dedicated LEVEL control. vThis input is located within the Ch. 6 section but is in fact a totally

separate 7th input for a stereo HOUSE source such as a CD player

nSeven-band MASTER EQ to fine-tune your sound

nLED output signal meter

nSixteen 24-bit high-quality DSP effects with PARAMETER control and flexible routing

vLEVEL control to mix a processed signal with the main signal

vThe PARAMETER control changes the sound character of each effect providing infinite choices

vSwitches to activate DSP and to route it to the MAIN and RECORD outputs

vDedicated LEVEL control to adjust the level of effects to the MONITOR output

nPatch section allows connection to suit different applications vPREAMP outputs to connect to an external sound system. vPOWER AMP inputs to connect to outboard mixer or other source v1/4” TRS to connect external powered Monitor to Matrix-600 vXLR output to connect optional powered subwoofer for even greater

bass impact

vSubwoofer output switch cuts low frequency to main speakers increasing headroom

vStereo RCA RECORD outputs to connect to the recording device

v1/4” TRS jack to connect dual foot switch for MUTE and EFFECTs control v1/4” TRS stereo HEADPHONES output with LEVEL control and switch to

connect to either MAIN or MONITOR output signal

Power Amplifier:

nHigh current output stage with discrete devices, not integrated IC amps to handle professional speakers

nOutput power of 2 x 300w RMS with significant headroom for peaks

nComprehensive amplifier and speaker protection circuitry to guard against short circuits, DC offsets, over-heating, turn-on thumps, subsonic and supersonic frequencies.

nBuilt-in clip limiter for cleaner sound at overloads and longer life of loudspeakers

nEqualization customized to enhance and optimize speaker system performance

nOutput for stereo headphones on rear panel

nVery efficient cooling, utilizing a large heatsink and two direct flow fans with variable speed control for quiet operation

nPower supply with low-noise toroidal transformer and a dual voltage (115/230Vac) selector switch

nCombo output connectors accept both Speakon™ and 1/4” plug speaker cables for flexibility in speaker connection

Loudspeakers

n3-way rear-ported speakers substantially outperform traditional 2-way designs in virtually every application

n10” high excursion woofer for extended and tight bass

n6.5” midrange with oversized magnet for clarity and wide coverage area

n1” exit phenolic diaphragm compression driver on an exponential horn matches the acoustic response of 6.5” midrange driver

nPremium quality X-overs with air core inductors and Mylar capacitors for clean and unrestricted SPL peaks

nInaudible light bulb protection circuitry on the tweeters for worry-free operation

nBuilt-in suspension points for permanent installation and pole mounting cup for mobile applications

n16-guage steel grilles, rubber feet and a conveniently located top handle

nCombo input connectors accept both Speakon™ and 1/4” plug speaker cables for flexibility in speaker connection

Complete System

nThe Matrix-600 ships in two boxes and includes two speaker covers, a mixer/amplifier carrying bag and two 20’ speaker cables with 1/4” plugs

5