Features, Warranty Registration, Precautions

MULTI-SAUCER II™

Features

•Five Moving Heads

•Easy Lamp Replacement

•Compact High-Tech Case Design

•Built-In Hanging Base

•Light Weight Case Design

•Multi-Colored Beams

•5 Multi-Colored Heads with 28 Lenses Each

•5 x LL-200 120v/200w or 5 x LL-200/2 220v/200w (220v version)

MULTI-SAUCER II™

Warranty Registration

The MULTI-SAUCER II™ carries a one year (365 days) limited war- ranty. Please fill out the enclosed warranty card to validate your pur- chase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) num- ber. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. num- ber by contacting our customer support team on our toll free custom- er support number. All packages returned to the service department not displaying a R.A. number on the outside of the package will be returned to the shipper.

MULTI-SAUCER II™

Precautions

Safety Issues: This unit may blow a fuse if the maximum allotted load of 15 amps (7 amps for 220v version) is reached. If the fuse needs replace- ment please refer to the fuse replacement instructions on page 5.

•To reduce the risk of electrical shock or fi re, do not expose this unit rain or moisture

•Do not spill water or other liquids into or on to your unit

•Do not attempt to operate this unit if the power cord has been frayed or broken

•Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fi re in case of an internal short

•This unit is intended for internal use only, use of this product out- doors voids all warranties written or implied.

MULTI-SAUCER II™

General Instructions

Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit. These instructions contain important safety information regarding the use and mainte- nance of this unit. Please keep this manual with the unit, for future reference.

MULTI-SAUCER II™

Operation

Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your American DJ® MULTI-SAUCER II™ before attempting operation.

General Operation: Just plug this light in, and watch it go. This fix- ture is designed to operate as a stand alone unit. It has been tested and the lamp has been installed at the factory there is no assembly necessary. The MULTI-SAUCER II™ is ready to be plugged in, out of the box. There is no power switch, after plugging the unit in the base and five outer heads will immediately begin to spin.

MULTI-SAUCER II™

Cleaning

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out periodically to opti- mize light output. Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp beam output.

1 . Use normal glass cleaner and a soft cloth to wipe down the out- side casing.

2.Use a soft brush to clean out the air vents

3.Clean the external optics with glass cleaner and a soft cloth every 20 days.

4.Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.

5.Always be sure to dry all parts completely before plugging the unit back in.