Fuse & Lamp Replacement, Warranty | American DJ LL-200 specs

MULTI-SAUCER II™

Fuse & Lamp Replacement

Halogen Lamp Warning! This fixture is fitted with halogen lamps which are highly susceptible to dam- age if improperly handled. Never touch the lamps with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions.

Caution: Always replace with the exact same type lamp and fuse, unless otherwise specified by an authorized American DJ® techni- cian. Replace with anything other than the specified part can damage your unit and will void your manufactures warranty.

Warning: If after you have replaced the lamp or fuse and you con- tinue to blow either one, STOP using the unit. Contact customer sup- port for further instructions, you may have to return the unit for ser- vicing. Continuing to use the unit may cause serious damage.

Fuse Replacement: Disconnect the unit’s main power supply. Use a number 2 Phillips screw driver in to the fuse holder housing (located on the bottom of the unit). Turn the screwdriver in a counter-clock- wise direction to remove the fuse holder. Remove the old fuse and discard it, replace the fuse with the same type. Insert the fuse holder back into it’s housing and turn in a clockwise direction to secure the holder in place.

Lamp Replacement: Caution! Never open the unit when in use. Always disconnect the main power and allow the fixture ample time to cool before attempting to replace the lamp. Lamp replacement has been made simple by incorporating a remove tray that is retained by a single thumb screws. Again, please remember to always replace with the exact same type lamp.

1.Be sure to follow the proper procedures when handling halogen lamps. Never touch the new lamp with your bare fingers.

2.Unscrew the two thumb screws that secure the lamp socket assembly cover to the outside of the spinning heads.

3.Once the thumb screws have been removed, remove the assembly cover plate to expose the lamps.

4.Remove and replace the lamp with an exact match.

5.Reassemble in reverse order.

MULTI-SAUCER II™

Warranty

ONE YEAR LIMITED WARRANTY

A.American DJ® hereby warrants, to the original purchaser, American DJ® products to be free of manufacturing defects in material and workmanship for a period of one year (365 days) from the date of purchase. This warranty shall be valid only if the product is pur- chased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.

B.For warranty service, send the product only to the American DJ® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American DJ® will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, American DJ® shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.

C.This warranty is void if the serial number has been altered or removed; if the product is modifi ed in any manner which American DJ® concludes, after inspection, affects the reli- ability of the product; if the product has been repaired or serviced by anyone other than the American DJ® factory unless prior written authorization was issued to purchaser by American DJ® ; if the product is damaged because not properly maintained as set forth in the instruction manual.

D.This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specifi ed above, American DJ® will replace defec- tive parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American DJ® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American DJ® . All products covered by this war- ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E.American DJ® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.

F.No warranty, whether expressed or implied, is given or made with respect to any acces- sory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American DJ® in connection with this product, includ- ing warranties of merchantability or fi tness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fi tness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American DJ® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.

G.This warranty is the only written warranty applicable to American DJ® Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

H.Lamps are not covered under this or any other warranty either written or implied.