Hubbell Electric Heater Company CR manual Section III Scheduled Maintenance and Operation, Freezing, Quarterly Inspection

Page 14

SECTION III - SCHEDULED MAINTENANCE AND OPERATION

WARNING / CAUTION

Before performing any maintenance procedure, make certain power supply is OFF and cannot accidentally be turned on.

MAINTENANCE AND OPERATION

The heater is automatic in its operation. It will maintain water at the temperature setting of the thermostat. The heater should not be turned on without first making sure that the vessel is full of water and that all air has been released.

FREEZING

The vessel should be fully drained in the event the electricity has been turned off and if there is danger of freezing.

QUARTERLY INSPECTION

1.Monitor thermostat

a.Let water heater completely heat to a designated thermostat setting.

b.After thermostat satisfies (that is, when the thermostat actually clicks off), draw water from heater.

c.Compare water temperature of drawn water to the temperature setting of the thermostat when it satisfies. Normal variation between the two points is approximately + 5°F.

d.If these two readings do not coincide within acceptable tolerances and verification has been made of the accuracy of the temperature-reading gauge, replace the thermostat.

2.Lift test lever on relief valve and let water run through valve for a period of approximately 10 seconds. This will help flush away any sediment that might build up in water passageways.

3.Inspect element flange for leakage as follows:

a.Shut off Power Supply.

b.Remove element housing cover.

c. Visually inspect heating element gasket for evidence of leaks.

d.Rub finger around gasket that is between the heating element and tank flange for any evidence of moisture. If moisture is present or a water drip is observed, follow procedure outlined in Section V.

4.Check for loose electrical connections. Tighten as necessary.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Electric Heater Company STRATFORD, CT Hubbell Electric Heater CompanyBOX Table of Contents Section Title Page Vessel Connections Section I General Description and ConstructionPressure Vessel Heating Element Flow SwitchOuter SHELL, INSULATION, and Supports Electrical EnclosureControl Thermostat Fused LOW Voltage Transformer Temperature High Limit SwitchMagnetic Contactor Options Individually Fused ElementsLOW Water CUT-OFF Stainless Steel JacketBuilt-In Circuit Breaker On / Off Control SwitchAudible Alarm Building Management System BMSSilicon Control Rectifier Dial Temperature and Pressure GaugeSpecial Customized Features Heater Placement Piping InstallationFinal Checks Electrical InstallationFilling the Heater Freezing Section III Scheduled Maintenance and OperationMaintenance and Operation Quarterly InspectionSection IV Troubleshooting Symptom Probable Cause Corrective Action / RemedyPage Section V Servicing & Replacement of Parts Immersion Temperature High Limit CUT-OFF Immersion Thermostat Heating Element Relief Valve Section VI Miscellaneous Charts and Formulas Nema Enclosures Electrical Data Formulas Torque Values

CR, CR specifications

Hubbell CR,CR is a critical innovation in lighting solutions, designed to provide efficient, reliable, and versatile illumination for various commercial and industrial applications. This product line stands out for its commitment to quality, energy efficiency, and user-friendly features.

One of the main features of Hubbell CR,CR is its robust construction, which includes durable housing materials that can withstand harsh environments. This makes them ideal for both indoor and outdoor applications, including warehouses, manufacturing plants, and even sporting facilities. The robust design ensures longevity, reducing the need for frequent replacements and maintenance costs.

In terms of technology, Hubbell CR,CR incorporates advanced LED technology, which is known for its long lifespan and energy efficiency. LED lighting not only consumes significantly less energy compared to traditional lighting systems, but it also generates less heat, contributing to lower cooling costs for facilities. Additionally, the LED technology used in Hubbell CR,CR provides superior color rendering, enhancing visibility and safety in work environments.

Another characteristic of the Hubbell CR,CR is its versatility in terms of installation. The fixtures can be easily mounted on various surfaces, offering flexibility in design and layout. This adaptability allows businesses to create customized lighting solutions tailored to their specific needs. The fixtures also come with adjustable brightness levels, providing control over the intensity of light in a space and further contributing to energy savings.

Hubbell CR,CR also emphasizes sustainability. By utilizing energy-efficient technology and offering longer life spans, the product line contributes to a reduction in carbon footprints. Organizations looking to meet sustainability goals can benefit from investing in Hubbell lighting solutions.

Moreover, Hubbell CR,CR is designed with user experience in mind. The installation process is straightforward, minimizing downtime during setup. Maintenance is also simplified, as LED fixtures have fewer components that require regular servicing.

In conclusion, Hubbell CR,CR represents a forward-thinking approach to lighting solutions. Its combination of durable construction, energy-efficient LED technology, versatility in installation, and user-friendly characteristics makes it an exemplary choice for businesses seeking reliable and sustainable lighting options. As industries continue to focus on energy efficiency and environmental responsibility, products like Hubbell CR,CR will play an essential role in shaping the future of commercial and industrial lighting.
Top Page Image Contents