Hubbell Electric Heater Company CR manual Heater Placement, Piping Installation

Page 12

SECTION II – INSTALLATION

WARNING / CAUTION

DO NOT TURN ON THE ELECTRIC POWER SUPPLY to this equipment until heater is completely filled with water and all air has been released. If the heater is NOT filled with water when the power is turned on, the heating elements will burn out.

For protection against excessive pressures and temperatures, local codes require the installation of a temperature-and-pressure (T&P) relief valve certified by a nationally recognized laboratory that maintains periodic inspection of production of listed equipment of materials, as meeting the requirements for Relief Valves and Automatic Gas Shutoff for Hot Water Supply Systems. ANSI Z21.22-1971. THE CUSTOMER IS RESPONSIBLE TO PROTECT PROPERTY AND PERSONNEL FROM HARM WHEN THE VALVE FUNCTIONS.

All water heaters have a risk of leakage at some unpredictable time. IT IS THE CUSTOMER'S RESPONSIBILITY TO PROVIDE A CATCH PAN OR OTHER ADEQUATE MEANS, SO THAT THE RESULTANT FLOW OF WATER WILL NOT DAMAGE FURNISHINGS OR PROPERTY.

HEATER PLACEMENT

1.Place the heater on a solid foundation in a clean, dry location nearest to the point of most frequent hot water use.

2.The heater should be protected from freezing and waterlines insulated to reduce energy and water waste.

3.Leave sufficient clearance for element withdrawal, if necessary.

4.Do not install in an area where flammable liquids or combustible vapors are present.

PIPING INSTALLATION

NOTE: The most effective means for preventing deterioration from accelerated corrosion due to galvanic and stray current is the installation of dielectric fittings/unions. The installation of these fittings is the responsibility of the installing contractor.

1.Connect the cold water inlet and hot water outlet to the appropriate connections as shown; refer to the drawing for location and sizes.

2.Install in-line vacuum breaker and in-line pressure and temperature gauge, if supplied.

3.Install the combination temperature and pressure safety relief valve in the tapping provided. Note that this is required by law for safety considerations.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Electric Heater Company Hubbell Electric Heater Company BOXSTRATFORD, CT Table of Contents Section Title Page Section I General Description and Construction Pressure VesselVessel Connections Flow Switch Outer SHELL, INSULATION, and SupportsHeating Element Electrical EnclosureControl Thermostat Temperature High Limit Switch Magnetic ContactorFused LOW Voltage Transformer Individually Fused Elements LOW Water CUT-OFFOptions Stainless Steel JacketOn / Off Control Switch Audible AlarmBuilt-In Circuit Breaker Building Management System BMSDial Temperature and Pressure Gauge Special Customized FeaturesSilicon Control Rectifier Heater Placement Piping InstallationElectrical Installation Filling the HeaterFinal Checks Section III Scheduled Maintenance and Operation Maintenance and OperationFreezing Quarterly InspectionSection IV Troubleshooting Symptom Probable Cause Corrective Action / RemedyPage Section V Servicing & Replacement of Parts Immersion Temperature High Limit CUT-OFF Immersion Thermostat Heating Element Relief Valve Section VI Miscellaneous Charts and Formulas Nema Enclosures Electrical Data Formulas Torque Values

CR, CR specifications

Hubbell CR,CR is a critical innovation in lighting solutions, designed to provide efficient, reliable, and versatile illumination for various commercial and industrial applications. This product line stands out for its commitment to quality, energy efficiency, and user-friendly features.

One of the main features of Hubbell CR,CR is its robust construction, which includes durable housing materials that can withstand harsh environments. This makes them ideal for both indoor and outdoor applications, including warehouses, manufacturing plants, and even sporting facilities. The robust design ensures longevity, reducing the need for frequent replacements and maintenance costs.

In terms of technology, Hubbell CR,CR incorporates advanced LED technology, which is known for its long lifespan and energy efficiency. LED lighting not only consumes significantly less energy compared to traditional lighting systems, but it also generates less heat, contributing to lower cooling costs for facilities. Additionally, the LED technology used in Hubbell CR,CR provides superior color rendering, enhancing visibility and safety in work environments.

Another characteristic of the Hubbell CR,CR is its versatility in terms of installation. The fixtures can be easily mounted on various surfaces, offering flexibility in design and layout. This adaptability allows businesses to create customized lighting solutions tailored to their specific needs. The fixtures also come with adjustable brightness levels, providing control over the intensity of light in a space and further contributing to energy savings.

Hubbell CR,CR also emphasizes sustainability. By utilizing energy-efficient technology and offering longer life spans, the product line contributes to a reduction in carbon footprints. Organizations looking to meet sustainability goals can benefit from investing in Hubbell lighting solutions.

Moreover, Hubbell CR,CR is designed with user experience in mind. The installation process is straightforward, minimizing downtime during setup. Maintenance is also simplified, as LED fixtures have fewer components that require regular servicing.

In conclusion, Hubbell CR,CR represents a forward-thinking approach to lighting solutions. Its combination of durable construction, energy-efficient LED technology, versatility in installation, and user-friendly characteristics makes it an exemplary choice for businesses seeking reliable and sustainable lighting options. As industries continue to focus on energy efficiency and environmental responsibility, products like Hubbell CR,CR will play an essential role in shaping the future of commercial and industrial lighting.
Top Page Image Contents