7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-9. First install B10 candelabra bulbs (40 Watt Maximum) into the sockets.
7-10.Thread the pull chains through the hole in the center of the glass bowl.
7-11.Thread the fan pull chain through the hole in cover plate. Thread the light pull chain through the finial.
7-12.Screw the finial onto the threaded rod end until tight.
7-13.Attach the extra pull chains (included) to the fan pull chain and light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
Note: In compliance with US federal energy regulations this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation.
Light Bulbs (B10 Candelabra Base 40 Watt Maximum)
Threaded Rod
Glass Bowl
Cover Plate
Finial
Breakaway
Connector
42663-01 • 10/23/08 • Hunter Fan Company