American DJ MINI/C features, 30 ft. cable Stand by Black out, DJ Scan/RG Cleaning

Page 5

DJ Scan/RG™

Optional Remote

 

 

The MINI/C controller may be purchased separately allowing you to control the main unit, and any others connected to it, while it is in stand alone mode. You can set the unit to blackout. If you have more than one unit, make sure the remote control is plugged into the first unit in the daisy chain. The remote control will not have any effect if the unit is in DMX mode. When the unit is in blackout mode, the light will come on next to the blackout button.

The DJ Scan/RG™ may be controlled by a wide range of controllers; ie. Show Designer™, DMX Operator,™ Scene Setter™ or by the DJ MINI/C basic controller.

MINI/C features:

30 ft. cable

Stand by (Black out)

DJ Scan/RG™

Cleaning

 

 

Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses must be carried out periodically to optimize light output.

1.Use normal glass cleaner and a soft cloth to wipe down the outside casing.

2.Use a brush to wipe down the fan grill.

3.Clean the external optics with glass cleaner and a soft cloth every 20 days. Situation may very. If used heavily in clubs with lots of fog, cleaning may be required more often.

4.Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.

5.Always be sure to dry all parts completely before plugging the unit in.

Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew).

DJ Scan/RG™

Lamp Replacement

 

 

Lamp Replacement: Caution! Never open the unit when in use. Always disconnect the main power before attempting to replace the lamp.

1.Be sure to follow the proper procedures when handling halogen bulbs.

2.Lamp replacement has been made simple by incorporating the use of a removable lamp tray and thumb screws.

3.Loosen the thumb screw on rear cover.

4.Remove the tray.

5.Remove and replace the bulb.

6.Reassemble.

Remember to always replace with the exact same type lamp and fuse, unless otherwise specified by an authorized American DJ service technician.

©American DJ Supply® - www.americandj.com - DJ Scan/RG™ Instruction Manual Page 9

©American DJ Supply® - www.americandj.com - DJ Scan/RG™ Instruction Manual Page 10

Image 5
Contents DJ Scan/RG Introduction Charter StreetMaster/Slave Quick Start Stand Alone Mode DJ Scan/RG Safety PrecautionsDJ Scan/RG Features DJ Scan/RG Quick StartDJ Scan/RG Set Up Power SupplyUnpacking 256DJ Scan/RG Operating Instructions DMX ModeDJ Scan/RG Cleaning MINI/C featuresDJ Scan/RG Lamp Replacement 30 ft. cable Stand by Black outNo light from the unit Unit blacks out in stand alone modeUnit not responding to DMX Unit does not respond to soundFixed RotatingSpecifications DJ Scan/RG