Hubbell STH manual Adjustment of Pilot Operated Valves

Page 26

f.Apply air pressure to valve diaphragm so that stem halves are aligned and re-connect stem halves.

g.If valve will not open with air on the diaphragm, spring tension should be decreased.

h.Adjustment is essentially the same as if spring tension were increased except the adjustment screw is turned in the opposite direction.

5.ADJUSTMENT OF PILOT OPERATED VALVES

a.Pilot operated valves such as Spence or Spirax/Sarco are not fail safe. These valves have a liquid or gas filled thermo-static bulb and if this bulb loses its charge, the valve will go to its full open position and cause overheating of the water heater. This situation should be considered before attempting to adjust these valves.

b.Spirax/Sarco Valves are completely pre-set at the factory and there is no spring adjustment. Set the thermostat at the desired temperature and no further adjustment is required.

Image 26

Contents Electric Heater Company Hubbell Electric Heater Company STRATFORD, CTTable of Contents Section Title Page Page Nomenclature for Parts Nomenclature for Accessory Parts Page Section I General Description and Construction TankSteam Heating Coil Tank ConnectionsOuter SHELL, INSULATION, and Supports Steam Operating Controls TrapsSingle Solenoid Safety System OptionsPiping Installation Section II Installation and OperationWater Heater Placement HOOK-UP of AIR and Water Operated Controls Typical Piping Diagram Electrical InstallationFilling the Heater StartupShutdown Annual Inspection Section III Scheduled Maintenance and ServicingQuarterly Inspection Page Page Page Page Single Safety Solenoid System if installed Double Safety Solenoid System if installed Section IV Adjustment of Temperature Regulators Adjustment of 2-WAY AIR or Water Operated ValvesAdjustment of Pilot Operated Valves Page Section V Troubleshooting OverheatingExcessive vibration Section VI Miscellaneous Charts and Formulas Torque Values Metric Conversions

STH, ST specifications

Hubbell ST and STH connectors are pivotal components in the realm of power and data transmission. Known for their durability and reliability, these connectors are widely implemented in both commercial and industrial applications. Their design caters to the need for efficient connectivity while ensuring safety and performance.

The Hubbell ST connector is engineered with a robust, user-friendly configuration that allows for quick and simple installations. It features a bayonet-style coupling mechanism, which ensures that the connection is secure and resistant to accidental disconnection. This design is especially beneficial in high-vibration environments, making it ideal for use in various industries, including telecommunications, aerospace, and manufacturing.

On the other hand, the STH connector is specifically designed for high-temperature applications and environments where harsh conditions prevail. It is made from high-temperature materials that can withstand significant thermal stress, thus ensuring consistent performance even in challenging conditions. This feature is particularly crucial for industries such as oil and gas, renewable energy, and any sector that relies on high-performance machinery.

Both ST and STH connectors utilize advanced technologies to enhance their performance. They incorporate precision-engineered contact surfaces that allow for optimal electrical flow, while minimizing signal loss. This is especially important in data-intensive industries where maintaining signal integrity is critical. Additionally, these connectors feature insulation systems that provide protection against moisture, dust, and other environmental factors, significantly prolonging their lifespan.

One of the standout characteristics of Hubbell connectors is their versatility. They come in various configurations and sizes, allowing them to cater to a wide range of applications, from telecommunications to industrial machinery. The connectors can handle different voltage levels and current ratings, thus accommodating the requirements of diverse operational setups.

In conclusion, Hubbell ST and STH connectors represent reliability and functionality in connectivity solutions. Their robust construction, advanced technologies, and adaptability make them a top choice for professionals looking for efficient and dependable connectors in demanding environments. Whether it’s ensuring seamless data transmission or providing power to critical systems, Hubbell connectors stand out as a preferred solution across many industries.