American DJ Fixture Cleaning, Roto-Balls Cleaning, Roto-Balls Trouble Shooting

Page 3

Roto-Balls™

Cleaning

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out periodically to optimize light output.

1.Use normal glass cleaner and a soft cloth to wipe down the outside casing.

2.Clean the external optics with glass cleaner and a soft

cloth every 20 days.

4.Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.

5.Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom- mend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp beam output.

Roto-Balls™

Trouble Shooting

Trouble Shooting:

Listed below are a few common problems and solutions you should try before contacting customer support.

Unit rotates but has no light output from the unit;

1.Be sure you have connected your unit into a matching wall outlet.

2.Remove the lamp cover and be sure the lamp is seated in its socket properly. Occasionally lamps become loose during shipping be sure the lamp is push in to its socket all the way.

3.Be sure the lamp is good.

Unit does not rotate and lamp does not turn on;

1.Be sure you have connected your unit into a matching wall outlet.

2.Be sure the external fuse has not blown. The fuse is located on the side panel of the unit.

3.Be sure the unit is properly seated in the power outlet and the outlet has power.

Roto-Balls™

Warranty

90 DAY LIMITED WARRANTY

A.American DJ® hereby warrants, to the original purchaser, American DJ® products to be free of manufacturing defects in material and workmanship for a period of 90 days from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibil- ity to establish the date and place of purchase by acceptable evidence, at the time service is sought.

B.For warranty service, send the product only to the American DJ® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, American DJ® will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, American DJ® shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.

C.This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which American DJ® concludes, after inspection, affects the reli- ability of the product; if the product has been repaired or serviced by anyone other than the American DJ® factory unless prior written authorization was issued to purchaser by Ameri- can DJ®; if the product is damaged because not properly maintained as set forth in the instruction manual.

D.This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specified above, American DJ® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American DJ® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American DJ®. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E.American DJ® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.

F.No warranty, whether expressed or implied, is given or made with respect to any acces- sory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American DJ® in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchant- ability or fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American DJ® be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.

G.This warranty is the only written warranty applicable to American DJ® Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

©American DJ Supply® - www.americandj.com - Roto-Balls™ Instruction Manual Page 5

©American DJ Supply® - www.americandj.com - Roto-Balls™ Instruction Manual Page 6

Image 3
Contents Introduction Customer SupportRoto-Balls Introduction Fuse Replacement Lamp ReplacementGeneral Operation Roto-Balls Warranty Fixture CleaningRoto-Balls Cleaning Roto-Balls Trouble ShootingTechnical Specifications