Ruby Star Control & Functions Operation

Ruby Star™

Control & Functions

Ruby Star™

Operation

Power Supply: This unit is available in either 120v or 220v option. Before plugging your unit in be sure the source voltage in your area matches the required voltage for your American DJ® Ruby Star.™ Please refer to the power lable on the rear panel of the unit.

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

LEVEL SOUND

MIN MIN

Model : Ruby S tar

Serial No : ____________

Power :

Fuse :

Bulb :

AC 100-120V

AC 200-240V

FUSE

General Operation: This fixture is designed to operate as a stand alone unit. The Ruby Star™ is ready to be plugged in out of the box. There is no power switch, after plugging the unit in a power outlet the laser will immediately begin to cycle through the many built in pat- terns (provided there is an ample amount of sound to trigger the unit). The unit comes with several built-in patterns that automatically cycle through when the unit is operating, the patterns may not be selected manually. If the unit does not turn on after the unit has been plugged in, be sure the fuse has not blown and the unit is properly plugged in to a matching wall outlet. If problem continue to persist, please con- tact customer support for further instructions.

12 3 4

1.Audio Sensitivity Knob - This adjust audio sensitivity of the internal microphone (2). Turning the sensitivity knob in the clockwise direction will increase the sensitivity to sound. Turning the knob in the counter clockwise direction will decrease the fi xture’s sensitivity to sound. If the knob is turned completely in the counter-clockwise direction the sound sensitivity function will turn off.

2.Microphone - This microphone receives external low frequencies to trigger the unit in Sound-Active mode. This microphone is designed to receive low frequency sounds only, tapping on the microphone and high pitch sounds may not trigger the unit.

3.Power Cord Connection - This connection is used to supply main power to the fi xture. Use only the supplied I.E.C. power cord. Be sure the main power matches the required power of your fi xture. The rated power requirements are clearly marked on the rear panel of the unit.

4.Fuse Holder - This housing stores the 2 amp GMA protective fuse. Always replace with the exact same type fuse, unless otherwise instructed, by an authorized American DJ® service technician.

Sensitivity Knob: A sound sensitivity knob is located on the rear of the unit. Use this knob to regulate the amount of sound it takes to trigger the unit. Turning the knob in a clockwise direction will increase the units sensitivity to sound, turning the knob in a counterclockwise direction will decrease the units sensitivity. Turning the knob com- pletely to the counter-clockwise direction will turn off the sound- active mode.

Ruby Star™

Cleaning

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the external lenses should be carried out periodically to optimize light output.

1.Use normal glass cleaner and a soft cloth to wipe down the out- side casing.

2.Clean the external optics with glass cleaner and a soft cloth every 20 days.

3.Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec- ommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp beam output.