Antares ATR-1a manual Midi System Exclusive Message Examples

MIDI System Exclusive Message Examples

The following examples are Scripts from Opcode’s Galaxy. They show System Exclusive Messages which communicate with the ATR-1a.

This message will cause the ATR-1a to select Program Mode.

Put $F0 into Sys_Ex;

Put 0 1 $26 into Antares;

Put 0 into Device_Num;

Put 0 into Mode;

Put $F7 into End_Sys_Ex;

Send Sys_Ex Antares Device_Num ¬

Mode ¬

End_Sys_Ex;

This message will cause the ATR-1a to select Song Mode.

Put $F0 into Sys_Ex;

Put 0 1 $26 into Antares;

Put 0 into Device_Num;

Put 1 into Mode;

Put $F7 into End_Sys_Ex;

Send Sys_Ex Antares Device_Num ¬

Mode ¬

End_Sys_Ex;

This message sets System data in the ATR-1a.

Put $F0 into Sys_Ex;

Put 0 1 $26 into Antares;

Put $F7 into End_Sys_Ex;

Put 0 into Device_Num;

Put 4 into Mode;

Put 14 into Msg_Length;

Put 0 into MIDI_Channel;

Put 0 into MIDI_Sustain;

Put 0 into Pgm_Change;

Put 0 into MIDI_Note;

Put 0 into Pitch_Bend;

Put 0 into Mod_Wheel;

Put 0 into Foot_Switch;

Put 13 into Speed_Controller;

Put 13 into Vib_Rate_Controller;

Put 13 into Vib_Delay_Controller;

47