Vestax Mixing Controller owner manual Microphone SUB Input Section, MICROPHONE, SUB Input Section

MICROPHONE,

SUB INPUT SECTION

LINE 4 IN

9 L R

MIC

10
	MIC-1	MIC-2
	MIC-1
11	MIN	MAX
	MIC-2
	MIN	MAX
	EQ
	HI
12	-16dB	+16dB
	LOW
	-16dB	+16dB

EFFECT

13�

�

OFF POST

CUE

14

OFFON

MICROPHONE, SUB INPUT SECTION

9.LINE INPUT JACK(LINE4)

Input connectors for line level equipment such as CD players,tape decks ,DATs, or MDs ETC.

10.MIC INPUT JACK(MIC1,2) Input jacks of mic1, mic2.

11.MIC LEVEL

Adjusts the input level from all of the microphone inputs.

12.MIC EQUALIZER(HI,LOW)

Adjusts the HI and LOW frequencies for all of the

microphone input.	MASTER SECTION
13. EFFECT SWITCH
Used when sending signal to the external effect	MASTER	CUE
processor connected to the effect SEND/RETURN.	+8	+8
	+5	+5
14. CUE SWITCH
	+3	+3
Used to send the signal from the mic channel to the
	+1	+1
monitor section for head phone monitoring.

	0		0
	-1		-1
MASTER SECTION			16
	-3		-3
15. MASTER OUT LEVEL METER	-5		-5
	-7		-7
The LED level meters indicate the signal level of the
	-10		-10
line out.
	-15		-15
16. CUE LEVEL METER
	POWER		POWER
The LED level meters indicate the signal level of	L	R
PGM input selected by CUE SWITCH.			15
17. EFFECT SEND LEVEL	EFFECT
	SEND
Used to adjust the output level from EFFECT SEND
JACK. The signal is selected by the effect switch.			17
18. EFFECT RETURN LEVEL	MIN		MAX
Used to adjust the input revel from the EFFECT	RETURN
RETURN JACK. This EFFECT RETURN can be			18
used as the sub line input.
19. EFFECT CUE SWITCH	MIN		MAX
Used to send the signal from EFFECT RETURN	CUE		19
JACK to the monitor section for headphone	OFF		ON
monitoring.	MASTER
20. MASTER BALANCE VOLUME	BAL
Adjusts the signal balance of left to the right side of			20
the outputs from the OUTPUT jack on the rear
panel.	L		R
21. MASTER LEVEL VOLUME	LEVEL
Adjust the signal level output from the OUT PUT			21
jack on the rear panel.
22. SPLIT CUE SWITCH	MIN		MAX
When this switch is ON, the master signal is always	MONITOR
	SPLIT CUE
heard through the right earcup of the headphone.			22
	ON
The CUE signal will be heard in the left earcup when	OFF
that input is selected by the CUE SWITCH (5, 14).	PHONES
This enables both programas to be monitored	LEVEL
			23
simultaneusly,thus assisting in beat mixing.
23. HEAD PHONE LEVEL		MIN	MAX
Adjusts the headphone output level.
24. HEAD PHONE JACK	PHONES		24
	IN
Use this jack to connect the headphones the
inpodance 8ohm to 600ohm can be used, 150ohm is
recommended.