55/E／面付け 00.9.12 4:44 PM ページ 12
CROSSFADER SECTION
TRANSFORMER
A
14
○13 CROSS FADER
TRANSFORMER | CF MODE |
|
B
1315
HOW TO REPLACE THE CROSS FADER
Mixes the signal assignes by CROSSFADER ASSIGN(10) to A side of the crossfader and B side. When the crossfader is set in the center position, both A and B can be heard. This is a detachable fader for ease of replacement with
●Remove a knob and four screws which hold the fader unit.
●Take the unit out.
●Carefully remove the
●Insert the connector to the new fader unit.
●Replace the knob and the fader unit and fix it with screws.
MICROPHONE SECTION
MIC
GAINON
1
16 
2 
17
| DJ |
|
EQ |
|
|
HI |
|
|
LOW | +16dB | 18 |
|
+16dB | |
LEVEL |
|
| 19 |
MIN | MAX |
TALK OVER |
|
| 20 |
MIN | MAX |
IN |
|
21
○14 TRANSFORMER SWITCH
With the crossfader moved to either right or left, the opposite program can be heard instantly by pressing the opposite⑳ transformer button.
○15 CF MODE VOLUME
Adjust the crossfader curve. Clockwise rotation give a gentle crossfade good for long running mixes. Counter clockwise rotation gives a steep crossfade good for scratching and cutting.
○16 MIC GAIN
Adjusts the input level from each microphone input.
○17 MIC SELECTOR
Used to select the microphones to be Master section.
○18 MIC EQ (HI,LOW)
Adjusts the HI and LOW frequencies for all microphones input.
○19 MIC LEVEL
Adjusts the input level from all microphones input.
○20 TALK OVER LEVEL
When TALK OVER SWITCH ◯21 is depressed, the level of all sources excluding the microphone input are reduced. Reduction level can be adjusted by this control. Clockwise rotation gives a large reduction level.
○21 TALK OVER SWITCH
When this switch is depressed, the level of all sources excluding the microphone input are reduced.
6