Vestax PCV-150 owner manual HOW to Change the Fader Unit

HOW TO CHANGE THE FADER UNIT

Top panel

Driver

■HOW TO REMOVE THE CROSSFADER PANEL

○1 Remove crossfader knob and 2screws which fix

the crossfader panel.
○2 Remove the crossfader panel.	Crossfader�
	panel

Driver

Top panel

■HOW TO CHANGE THE FADER UNIT

○1 Remove the screws on the fader panel.

○2 Remove the fader unit from position in mixer.

○3 Carefully remove the multi-cable connector from fader unit.

○4 Attach multi-cable connector to new fader unit.

○5 Position the fader unit carefully and secure with screws.

Insert the � multi-cable connector

Note

Use a plus driver fitting screw.

Caution: When you change any parts, do not loose the screws with marking.

CF-PCV For

PMC SERIES ( PMC05ProII, PMC06ProA, etc)

PMC CONNECTOR

Set switch to "PCV" position.

Set switch to "PMC" position

8