Rotating and Replacing the OS2

1 . Remove the face plate.

2.Remove the 2 outer screws from the round OS2 plate (removing the 2 inner screws will detach the fader from the plate)

3.Rotate the plate to the desired posi - tion and tighten the screws back into the top and bottom holes.

1.Remove the the face plate.

2.Remove the 2 outer screws from the round plate (removing the 2 inner screws will detach the fader from the plate)

3.Remove the OS2 assembly and dis - connect the cable coming from the mixer.

4.Set the replacement fader assembly in the desired position and place the screws back in the top and bottom holes.

D J C R A Z E S I G N A T U R E M I X E R

W A R R A N T Y

This unit has been designed and man -			Consequently, the parts listed above
ufactured using	quality components.		are warranted to be free from defects in
Therefore, it is warranted to be free			materials and workmanship for a peri -
from defects in materials (limited as			od of thirty days (30) days from the
specified below), and workmanship for			original purchase date.
a period of twelve (12) months from the
original purchase date. During this			For the warranty to be valid, please
period, all service and parts necessary			complete the warranty registration card
to repair a defect will be free of charge.			attached or fill out the online registra -
This limited warranty applies to			tion
mechanical parts which are subject to			at www.stantonmagnetics.com
wear and tear as specified: Faders,
specified durability: 15,000		cycles;	Mail completed warranty cards to:
Rotary potentiometers, specified dura -
bility: 10,000 cycles; Switches, speci -			Stanton Magnetics, Inc, 3000 SW 42st
fied durability:	10,000	cycles.	• Hollywood, FL 33312

OWNER’S MANUAL

info@stantonmagnetics.com • (954) 689-8833 w w w . s t a n t o n m a g n e t i c s . c o m