RM.404 Rear Panel (FUNCTIONS)
Section L: Channel 4 Inputs
L. Channel 4 Input Connections: This group of connections are ALL inputs which are only routed to Channel 4 (select input using section G, (#23) from top panel.) Only two lines (L4, L8) and one phono (PH4) OR MIC 3 can be used as inputs here (the select switch located here toggles between PH4 and MIC 3.) NOTE: Line inputs are used to connect to line level sources such as CD players, samplers, tape players, etc. Phono inputs are used to connect only to turntables. Mic inputs connect directly to microphones. To prevent potential circuit damage, never connect line level source to phono inputs.
Section M: Channel 3 Inputs
M. Channel 3 Input Connections: This group of connections are ALL inputs which are only routed to Channel 3 (select input using section G, (#23) from top panel.) Only two lines (L3, L7) and one phono (PH3) OR CD can be used as inputs here (the select switch located here toggles between PH3 / CD.) The 1/8” connection is used only for connecting devices with the Fader Start feature with the appropriate cables (to activate Fader Start for this channel see Section D) NOTE: Line inputs are used to connect to line level sources such as CD players, samplers, tape players, etc. Phono inputs are used to connect to turntables. Mic inputs connect directly to microphones. To prevent potential circuit damage, never connect line level source to phono inputs.
Section N: Channel 2 Inputs
N. Channel 2 Input Connections: This group of connections are ALL inputs which are only routed to Channel 2 (select input using section G, (#23)) from top panel.) Only two lines (L2, L6) and one phono (PH2) OR CD can be input here (the select switch located here toggles between PH2 / CD.) The 1/8” connection is used only for connecting devices with the Fader Start feature with the appropriate cables (to activate Fader Start for this channel see Section D) NOTE: Line inputs are used to connect to line level sources such as CD players, samplers, tape players, etc. Phono inputs are used to connect to turntables. Mic inputs connect directly to microphones. To prevent poten- tial circuit damage, never connect line level source to phono inputs.