Stanton RM.404 owner manual Section O Channel 1 Inputs

Page 16

RM.404 Rear Panel (FUNCTIONS)

Section O: Channel 1 Inputs

O. Channel 1 Input Connections: This group of connections are ALL inputs which are only routed to Channel 1 (select input using section G, (#23) from top panel). Only one line (L1) and one phono (PH1) can be input here. The “GND” connections are used only for phono inputs which require a Ground cable and can be used for any phono input on any channel. NOTE: Line inputs are used to connect to line level sources such as CD players, sam- plers, tape players, etc. Phono inputs are used to connect to turntables. Mic inputs connect directly to microphones. To prevent potential circuit damage, never connect line level source to phono inputs.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RM.404 Please read carefully before use of this product Welcome RM.404 Top Panel Functions Section a Output Meters Section B Output Controls Section C Cue Controls Section D Crossfader Controls Section E MP3/Aux Section F Mic ControlsSection F Mic Controls Section G Channel Controls RM.404 Top Panel Functions Section H Power RM.404 Rear Panel FunctionsSection J Zone Output Section I Master OutputSection K RCA Outputs Section M Channel 3 Inputs Section L Channel 4 InputsSection N Channel 2 Inputs Section O Channel 1 Inputs Application Example Superior Sound Technology Technical Specifications CrosstalkTroubleshooting Problem / Symptom Possible Cause/ SolutionHear Warranty
Top Page Image Contents