Rear Panel - Functions and Controls
20 |
|
|
|
| 21 |
|
| 22 | 23 |
| |
SERIAL NO: |
|
|
|
|
|
|
|
|
|
|
|
MODEL NO: |
|
|
|
|
| LIGHT | MIC |
| |||
|
|
|
|
| CONTROL |
| |||||
|
|
|
|
|
|
| |||||
POWER SOURCE: |
| B |
| A |
|
|
|
|
| ||
115/230V~ 50/60Hz 20W |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| |||
|
| MADE IN TAIWAN |
| PLAYER CONTROL |
|
|
|
|
| ||
115V |
| L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
230V |
|
|
|
|
| GND |
|
|
| GND |
|
|
|
|
|
|
|
|
|
|
|
| |
AC IN~ |
| R |
|
|
|
|
|
|
|
|
|
|
|
|
|
| AUX 2 | PHONO2 |
|
|
| ||
| ! | MASTER | REC | LINE 2 PHONO 2 | PHONO 1 | AUX 1 PHONO 1 |
| ||||
|
|
| LINE 1 |
|
| ||||||
| OUTPUT |
| AUX 2 |
|
|
| AUX 1 |
|
| ||
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| |||
24 |
| 25 | 26 | 27 | 28 | 29 | 30 | 31 |
| 32 | |
20.AC VOLTAGE SELECTOR - Select between 115V/50Hz or 230V/60Hz. Make sure that the selector is set to the proper voltage you are using.
21.PLAYER CONTROL - Input mini plugs from CD player controller into these jacks, input CD 1 into jack A and CD 2 into jack B.
22.LIGHT CONTROL - Buffered audio output for light controllers that can use external input. Great for Touch Panels and Chase Controllers.
23.MIC JACK - Connect your microphone with 1/4 inch (6.3mm) jack plug here. The signals may be controlled by the DJ MIC CONTROL KNOB (19). BASS & TREBLE can be adjusted by the DJ MIC BASS CONTROL KNOB and the DJ MIC TREBLE CONTROL KNOB (19).
24.AC CONNECTION - Standard IEC plug with detachable AC power cord.
25.MASTER OUT - Parallel output of P.A. output. Connect with the input of a power amplifier.
26.REC OUT - Connect to your record unit. The REC OUT level is not influenced by the master control.
27.CHANNEL 2/LINE 2 RCA INPUT JACKS - Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE inputs. Turntables should only be connected to "Phono" inputs. The red colored RCA jack represents the right channel input and the white represents the left channel input.
28.CHANNEL 2/PHONO 2/AUX 2 INPUT JACKS - The type of input must directly reflect the selected mode of the Aux/Phono Selector Switch (29). Connect turntables equipped with MM pickup cartridge to PHONO inputs. CD players or Tape Decks should be connected to AUX LINE input. Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to AUX LINE inputs. The red colored RCA jack represents the right channel input and the white represents the left channel input.
©American DJ Supply® - www.americandj.com -