American Audio Q-2221/X manual Front Panel Functions and Controls

Front Panel - Functions and Controls

8 9 10

7

6

5

4a

3

2

1

11 12

13

14

15

16

17

4b

18

19

1.FEATHER FADER PLUS™ CROSSFADER - Mixes the signals of channel 1 and channel 2. When the crossfader is set in the center position, both channels can be heard at once.

2.HAMSTER SWITCH - Changes the polarity of the Crossfader (for crabbing). Channel 1 will be activated by the right side of the crossfader (mixing from right to left), and Channel 2 will be activated by the left side of the crossfader (mixing from left to right).

3.CHANNEL FADER - These faders control the output level of each channel.

4a. CHANNEL 1 TRANSFORMER SWITCH (CHANGEABLE) - Used to select the input to be sent to channel

1. TRANSFORMER SWITCH may be used up/down or left/right. To change the switch, see diagram on page 9.

4b. CHANNEL 2 TRANSFORMER SWITCH (CHANGEABLE) - Used to select the input to be sent to channel 2. TRANSFORMER SWITCH may be used up/down or left/right. To change the switch, see diagram on page 9.

5.PFL BUTTONS - Depressing these button sends the PFL (Pre-Fader Level) input signal to the cue level controls (14, 15, and 16). This allows you to monitor an input signal in a pair of headphones.

©American DJ Supply® - www.americandj.com - Q-2221/X User Instructions page 5