Additional Information

Troubleshooting

If this unit does not operate as expected, the problem may simply be an oversight, a disconnected cable or a setting error. Before calling a service technician, compare the symptoms of the problems with those listed below to see if you can correct the problem yourself.

Operation is not possible

/The disc is dirty or damaged, replace it with a new one.

Playback is not possible

/Condensation has formed inside the cabinet, remove the disc and leave this unit’s power on for a few hours.

/Turn on the power.

/Insert the disc in accordance with the direction of the arrow on the disc case.

/Nothing has been recorded on the current disc. Load a disc that has been recorded.

Recording is not possible

/The disc has write protected to prevent accidental recording (“Protected” is displayed). Slide the protect tab back into place to cover the hole on the side of the disc.

/The source is not connected correctly. Recheck all connections.

/The recording level is too low. Use the TRIM knob to adjust the recording level.

/Replace the current disc with one that can be recorded on.

/Replace the current disc with one that has enough time left, or erase unnecessary songs.

/If the power cord was unplugged during recording, or there was a power outage, the recording up to that point may be lost. If recording was not completed normally, try recording again starting from the beginning.

Excessive noise

/Place this unit away from televisions and other equipment.

60EN

Display Message List

This unit uses the display area to show operating condition and error messages. The meaning of each message is explained below.

Battery Low

The internal battery is low.

Take the unit to an authorized service station and request a battery replacement.

Blank Disc

An unrecorded MD or MD which has been erased is loaded.

Disc Error

An abnormal or damaged MD, whose TOC cannot be read (etc.) is loaded. The loaded disc cannot be used with this unit.

Disc Full

Recording is not possible because there is no time remaining on the disc.

Error**

A serious error has occurred. Please contact a Sony service station.

Invalid

An operation was canceled due to an invalid setting, or the processing of an edit command was canceled midway.

Recheck the settings or try performing the same operation again.

Loading

The disc is currently being loaded.

Name Full

No more song or disc name characters can be entered. (Approximately 1700 characters have already been entered.)

No disc

No disc loaded in this unit.

Processing

The unit is writing data or performing an edit operation.

Protected

The currently loaded disc is write protected. Or, a disc that cannot be recorded on has been loaded, such as a read only disc (etc.).

Retry Error

Normal recording was not possible because vibrations or a scratched disc (etc.) caused repeated rewriting.

Toc Reading

The unit is reading the TOC data from the disc.

Toc Writing

The unit is writing the TOC data to the disc.

Tempo Full

No more tempo information can be input.

Unloading

The unit is ejecting the disc.

Page 59 Page 61
Page 60
Image 60
Sony MDM-X4 operating instructions Troubleshooting, Display Message List, 60EN
Page 59 Page 61

MDM-X4 specifications

The Sony MDM-X4 is a cutting-edge digital multi-track recorder that combines professional quality with user-friendly features, making it an essential tool for musicians, sound engineers, and audio enthusiasts. This device provides an innovative solution for capturing and manipulating sound, enhancing both creativity and functionality in recording environments.

One of the standout features of the MDM-X4 is its ability to record up to four tracks simultaneously. This capability makes it ideal for bands or projects that require multi-tracking, allowing for the simultaneous recording of vocals, instruments, and other audio sources. The device supports a variety of input formats, including analog and digital, ensuring compatibility with a wide range of equipment.

The MDM-X4 incorporates advanced audio processing technologies, including high-resolution A/D and D/A converters that deliver pristine sound quality. Users can expect a frequency response that captures the nuances of their recordings, providing clarity and depth. The device supports 24-bit audio resolution, ensuring professional-grade output suitable for both studio and live applications.

In terms of connectivity, the MDM-X4 boasts multiple I/O options, including USB ports for easy integration with computers and other digital audio workstations. This allows users to transfer their recordings directly to their preferred editing software, streamlining the post-production process.

Additionally, the MDM-X4 features intuitive controls that simplify navigation and operation. The built-in LCD screen displays essential information, such as track levels, playback time, and monitoring options. This user-centered design greatly enhances the recording experience, allowing users to focus on their creative output.

The device is also equipped with a range of built-in effects and processing options, including reverb, compression, and EQ adjustments, offering users the ability to shape their sound without needing additional external processing units. These effects can be applied in real time or during post-production, providing flexibility in sound design.

Overall, the Sony MDM-X4 is a versatile and powerful multi-track recorder that caters to the needs of both novice and experienced users. Its combination of high audio quality, multi-track capabilities, and user-friendly features make it a standout choice in the realm of digital recording technology, allowing users to capture their musical ideas with precision and ease.
Top Page Image Contents