20EN
Recording
Checking the Recording
1Press CUE to prepare for monitoring.
Adjust the monitor volume using the respective
TRACK knobs and the MONITOR knob.
2Press ( PLAY.
Playback begins.
If necessary, you can use the jog dial to locate a
specific point.
To rerecord
Follow the “Recording” procedure on the previous
page.
Overdub Recording
You can record other sound on a different track while
listening to the playback from a previously recorded
track. This kind of recording is called overdubbing.
Preparations
1Set the INPUT switch for the channel to which
you will input the instrument or microphone
sound to LINE/MIC (up position).
2Set the fader for the channel to which you will
input the sound to about 7 or 8.
3Use the ASSIGN switch and PAN knobs to direct
the sound to the group path you want to record.
4Press the REC SELECT key corresponding to the
group path number you selected in step 3 to
specify the track to be recorded.
5Press the monitor track set key corresponding to
the group path number you selected in step 3.
6Press CUE, then turn the TRACK knob
corresponding to the track containing the
recorded sound you want to hear while recording
to adjust the sound to a level at which it can be
monitored.
Use the MONITOR knob to adjust the monitor
level.
1
2
6
5
2,7
34
1
b
Recorded section Section
recorded by
overdubbing