49EN
Editing Entire Songs (Song Edit)
5Press ENTER
“OK?” appears in the display.
6Press ENTER again.
The selected songs are exchanged.
To start over again from the beginning, or quit the
edit operation, press EXIT instead of ENTER.
When the edit operation has finished, the edit
select screen reappears.
To carry out another edit operation in succession
use the jog dial to specify the operation you
desire.
7Press EXIT.
This completes the edit operation.
Naming a Song (Song Name)This function lets you assign names to songs using
upper and lower case letters of the alphabet, numbers,
and symbols.
1Press EDIT.
[EDIT] appears in the display.
2Turn the jog dial so that “Song Name” appears in
the display.
The name of the edit function starts blinking in
the display.
3Press ENTER.
The edit setting items appear in the display.
4Turn the jog dial to display the character you
desire.
The selected character blinks. In addition to the
letters of the alphabet, you can also use numbers
and symbols. The symbols which can be
displayed are as follows:
! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @
^ _ ` (blank)
5Press ENTER.
The character selected in step 4 lights steadily and
the cursor starts blinking in the next position.
To go back to the previous position, press EXIT.
6Repeat steps 4 and 5 until to complete the title.
7Press EXIT when the cursor is in the leftmost
position or
press ENTER when the cursor is in the rightmost
position to enter the final name.
To carry out another edit operation in succession
use the jog dial to specify the operation you
desire.
8Press EXIT.
This completes the edit operation.
3,5,
6,7,
2,4
8
1