30EN
Recording
Preparations
1Press down the INPUT switches on channels 1~4.
(Set channels 1~4 to receive the (TRACK) sound
played back from the recorder.)
2Set the faders for channels 1~4 to about 7 or 8.
3Set the ASSIGN switches and PAN knobs for
channels 1~4 to direct the sound to tracks 1 and 2.
(Set the playback sounds input from the recorder
to channels 1~4 to be recorded on tracks 1 and 2.)
4Prepare the monitor.
• Press the monitor track key corresponding to
the group path selected in step 3 (In this case,
press 1-2).
• Turn the MONITOR knob and the TRACK
knob(s) to adjust the sound to a level that can be
monitored.
5Press ( PLAY.
Playback begins.
6Use the faders for channels 1~4 to adjust the
record balance of the sound to be recorded on
tracks 1 and 2.
You may also need to adjust the monitor balance
at this time.
Press the p STOP key after making the necessary
adjustments.
7Turn the jog dial to locate the point on the counter
where the recording will begin.
8Press the REC SELECT key for tracks 1 and 2.
This makes it possible to record on tracks 1 and 2.
Recording
1Press REC.
The unit switches to record pause mode.
2Press ( PLAY.
Recording begins.
Play together with the previously recorded
performance.
3When you’ve finished playing, press p STOP.
Checking the Recording
1Turn the jog dial to set the counter to the point
you want to hear.
2Press CUE to prepare for monitoring.
Adjust the monitor volume using the respective
TRACK knobs and the MONITOR knob.
3Press ( PLAY.
Playback begins.
7
5
8
4
2,6
3
1