Uniden BC780XLT manual Troubleshooting

Troubleshooting

If your BC 780XLT is not performing properly, try the following steps.

Problem		Suggestion
Scanner won’t work.	1. Check the connections at both ends of the AC Adapter.
	2.	Turn on the wall switch of your room. You could be
		using an outlet controlled by the wall switch.
	3.	Move the AC Adapter to another wall outlet.
Improper reception.	1. Check the antenna connection or move and reposition
		the antenna.
	2.	Move the scanner.
	3.	You may be in a remote area which could require an
		optional multi-band antenna. Check with your dealer or
		local electronics store.
Scan won’t stop.	1. Adjust squelch threshold - refer to page 12, “Setting the
		Squelch”.
	2.	Check the antenna connection.
	3.	Check to see if many of the channels are locked out.
		If so, the scanner has less chance of finding an
		active channel.
	4.	Review each channels frequency to see if it is still
		stored in memory and is correct.
	5.	Its possible that none of the programmed frequencies
		are currently active.
Scan won’t start.	1. Press the SCAN key again.
	2.	Adjust the SQUELCH control.
	3.	Check to see if all channels are locked out.
Weather Scan won’t work.	1. Adjust squelch threshold - refer to page 12, “Setting the
		Squelch”.
	2.	Check the antenna.

71