VocoPro DA-900 owner manual Mic Inputs, Powering Up, Sound Check, Your sound check is now complete

Getting Connected cont...

The DA-900's two microphone jacks accommodate microphones with ¼" style plugs. Microphones with an 1/8-inch mini-plug can also be connected with an 1/8-inch to ¼" adapter.

(a)If the microphone cable is detachable, plug the XLR end into the microphone firmly till it "locks" into place.

(b)Unravel the microphone cable to prevent tangling and connect the ¼-inch plug in one of the DA-900's microphone jacks.

Mic Inputs

EQ

DISPLAY

MIC EFFECT

MIC EQ

Mic 1

MIC1/VOLMIC1

NORMAL

MIC2MIC2/VOL

Mic 2

Powering Up

(a)Plug the AC power cord's female end into the DA-900 and plug the other end into a 110-240V AC wall outlet, but do not turn on the DA-900 yet.

NOTE: The DA-900 can be used with 110V-120V and 220V-240V power supplies. Please set the VOLTAGE SELECTOR to match your AC power supply. If plugged into a AC power outlet with the VOLTAGE SELECTOR set improperly, the DA-900 may malfunction, possibly to the point of system failure. In this case, the product warranty would become void.

(b)Turn on power to all connected external devices.

(c)If dealing with VIDEO, be sure your TV is set to receive video input from the source player's VIDEO OUTPUT jack. (Some TV's use a VIDEO INPUT, AUX or CHANNEL 0 as a "dedicated" video channel). Check you TV's instruction manual to see how it selects its video channel(s).

(d)Turn on the power to the DA-900.

Sound Check

(a)Select the correct input on your amplifier. For example, if the LINE OUTPUT from the DA-900 is connected to the LINE 1 INPUT on the amplifier, set the amplifier's INPUT CHANNEL to LINE 1.

(b)Set the MASTER VOLUME control on amplifier to moderate level for testing and adjust the MUSIC E.Q. as desired.

(c)Set the DA-900's MIC 1-2 VOLUME controls to 50% and set the MIC E.Q. as desired.

(d)Set the DA-900's INPUT SELECTOR to the correct channel that a source player is connected to. For example, if you wish to play from the player connected to the DVD input channel, press the DVD button.

(e)Start playback from source player and ensure the connected MIC is on. Begin to sing and you should hear the music playback and your vocals mixed together from the speakers.

Your sound check is now complete!

9