Mounting

Tools required:

•Phillips Screwdriver

•7 Mounting Screws

•2 Mounting Brackets

•19” Rack Case

Brackets: 2

	Screws: 7
(not included)
(included)	(if rack mounting)
(included)	(if rack mounting)
(not included)

For mounting versatility, the DA-1000 Pro can be installed as a stand alone component in a home entertainment system or mounted to a compatible rack case via the included mounting brackets.

To install to a pre-existing entertainment system:

1. Place unit in desired space and make appropriate connections.

To install unit to a rack case, complete the steps below:

1.Attach mounting brackets to the DA-1000 Pro via the mounting screws.(There is one bracket for each side).

Figure:1

Left Bracket

Figure:2

Right Bracket

2.Align the DA-1000 Pro with desired space in rack and slide in slowly, rear panel first.

3.While aligned use rack case screws (not included) in the order shown in below diagram to stabilize the DA-1000 Pro in its space. Using the “X” rotation (numbered below) will ensure even tension and plush alignment.

Note: Do not tighten screws	1
firmly till all screws are in place.