M-Audio Profire 610 manual Using ProFire, Setting Input Levels, Line Inputs, Pdif inputs

Page 20

ProFire 610

User Guide

19

9

 

 

 

 

 

Using ProFire 610

 

 

 

Setting Input Levels

 

 

 

Mic/Inst Inputs

 

 

 

To set gain levels for an analog input, begin by turning the Gain Knob 3

for that channel fully counter-

 

clockwise. While the sound source is playing at its loudest levels, slowly turn the knob clockwise until the red clip indicator 2 begins to illuminate. Then, turn the knob counter-clockwise until the clip indicator no longer illuminates. At this point, you should be ready to record with the optimum gain setting.

If the clip indicator illuminates even at the lowest gain setting (e.g., when the gain knob is fully counter- clockwise), pull the gain knob to the “out” position to engage the 20 dB pad before setting gain levels.

Please keep in mind that the red LED indicates that your input is clipping (distorting) digitally. This is not the same kind of analog-style distortion found on guitar amplifiers and effects pedals. Digital distortion is generally considered to be harsh and unmusical and it is recommended that you use these LED meters to avoid this type of clipping.

Line Inputs

Connect the outputs of your line level devices to the rear-panel Line Inputs 15 . To maintain the highest possible audio fidelity, the ProFire 610 Line Inputs do not feature attenuation or “trim” circuitry and are connected directly to the A/D converter. This means that any adjustments to that signal level must be made at the source. If you have an output level control on the device that you’ve connected to the line inputs, adjust that output level control to change the recording level. Most recording software will allow you to add gain to a recording that is made at a level that is initially too low, but be careful that the recording level is not reaching digital clipping (going into the red) while recording. You can monitor your signal levels by viewing the input meters on any of the Monitor Mixer tabs of the Control Panel.

S/PDIF inputs

The S/PDIF inputs 13 on ProFire 610 can receive two channels of digital audio on input channels 9/10. Like the Line Inputs mentioned above, the signal level that you receive at the S/PDIF inputs will be the signal level that you record. Adjustments to the S/PDIF input levels must be made at the source. If your S/PDIF device has an output level control, use that control to adjust the recording level. Use the meters on any of the Monitor Mixer tabs to view your incoming levels.

See the “Digital Clocking” and “Sync Source” sections of this User Guide for more information on digital synchronization.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents ProFire Software Control Panel Driver Installation Hardware ConnectionsIntroduction What’s in the Box Using ProFire Midi Troubleshooting WarrantyStandalone Operation Digital Clocking Scenario 3 Creating a Synchronized Digital LoopIntroduction What’s in the BoxProFire 610 Features Minimum System RequirementsControls and Connectors Front Panel DescriptionsProFire User Guide Rear Panel Descriptions Driver Installation Hardware ConnectionsConnecting Microphones and/or Instruments Connecting Line-Level InputsDigital S/PDIF Connections Headphone MonitoringConnecting the Analog Outputs Software Control Panel Mixer TabsLevel Meter PanMute SoloSettings Tab Hosted Mode Sync SourceLevel Fader Channel NameAHosted Mode Sample Rate Hosted Mode Asio / WDM Buffer SizeStandalone Mode Sync Source Standalone Mode Sample RateMaster Volume Knob Mixers Active at Sample Rates Above 96 kHzFile About TabAdditional Functions Edit ViewHelp Using ProFire Setting Input LevelsLine Inputs Pdif inputsConfiguring your Audio Software Setting the sample rate and bit depth of your sessionSelecting ProFire 610 as the audio device Routing your software outputsAbout Overdub Recording and Monitor Mixing Tab Name Output of this tab is routed toUsing the Monitor Mixer ProFire User Guide Standalone Operation Digital Clocking Scenario 1 ProFire 610 as Clock Master Scenario 2 ProFire 610 Slaved to S/PDIF Input ProFire 610 Master Digital Effects Processor Slave ProFire 610User Guide Troubleshooting If you have no soundIf you are experiencing clicks and pops in your recordings Warranty Warranty Terms Warranty RegistrationAudio USA

Profire 610 specifications

The M-Audio Profire 610 is a highly regarded audio interface designed for musicians, producers, and audio engineers seeking a professional-grade solution in their music production setups. Combining advanced technologies with user-friendly features, this interface is well-suited for recording, mixing, and music production tasks, whether in a studio or a home environment.

One of the standout features of the Profire 610 is its 8-in/10-out configuration, which provides ample connectivity options for various audio sources. The device includes four XLR/TRS combo inputs with high-quality preamps, allowing for flexible microphone or instrument connections. Each input is equipped with a gain control, ensuring optimal levels and sound quality. The unit also features phantom power, enabling the use of condenser microphones.

The Profire 610 employs FireWire connectivity, offering low latency and high-speed data transfer for seamless recording and playback. This technology minimizes the delay between your performance and its output, crucial for live recordings and real-time monitoring. Moreover, the interface is compatible with both Mac and PC, making it a versatile choice for users on different platforms.

High-definition audio quality is another hallmark of the Profire 610. It supports up to 24-bit/96 kHz audio resolution, delivering pristine sound reproduction that meets the demands of professional applications. Users can appreciate the clarity and detail in their recordings, whether working on vocals, instruments, or entire mixes.

In addition to its physical features, the Profire 610 includes several software bundles, providing essential tools for music production. The unit typically comes with recording and editing software, virtual instruments, and effects plugins, enabling users to dive straight into their projects without needing additional purchases.

Another important characteristic of the Profire 610 is its output options. With balanced TRS outputs, there is minimal interference and noise, ensuring that the sound remains clean and professional. The device also includes routing capabilities, allowing users to monitor inputs directly or set up different mixes for recording and playback.

Overall, the M-Audio Profire 610 is a robust audio interface that boasts a combination of versatility, high-quality sound, and user-friendly design. Its powerful features make it an excellent choice for anyone looking to elevate their audio production experience, making it a staple in many modern studios. Whether you are an aspiring musician or a seasoned producer, the Profire 610 offers the tools necessary to achieve professional results.
Top Page Image Contents