M-Audio Profire 610 manual ProFire 610 Features, Minimum System Requirements

Page 5

ProFire 610

User Guide 4

3

 

 

 

ProFire 610 Features

 

 

•Six-input, ten-output audio configuration

•Up to 24-bit/192kHz operation

•Two high-quality mic/instrument preamps featuring OctaneTM technology, LED meters, and phantom power

•Two front-panel XLR/TS Combo jacks accepting mic or instrument level inputs

•Two rear-panel 1/4” TRS balanced line inputs

•Eight rear-panel 1/4” TRS balanced line outputs

•Two independent 1/4” headphone outputs with volume control knobs for each output

•S/PDIF In/Out

•MIDI In/Out

•Powerful onboard DSP providing five near-zero latency 16x2 monitor mixers

•User-assignable Master Volume control

•Functions as a standalone two-channel mic preamp and A/D – D/A converter

4 Minimum System Requirements

Minimum system requirements can be found on the ProFire 610 product packaging as well as the M-Audio website.

A Note about Operating System Updates: Please check the M-Audio driver download page at http://www.m-audio.com/drivers for the availability of an updated driver before you decide to install operating system updates.

Before new M-Audio device drivers are released, they are tested for use with the operating system versions that are available at that time. When updates for an operating system are released by Microsoft or Apple, all M-Audio device drivers have to be re-tested and possibly updated to ensure proper operation.

M-Audio recommends refraining from installing operating system updates until a driver has been posted to the M-Audio website for that specific operating system.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ProFire Software Control Panel Driver Installation Hardware Connections Introduction What’s in the Box Midi Troubleshooting Warranty Using ProFireStandalone Operation Digital Clocking Scenario 3 Creating a Synchronized Digital LoopWhat’s in the Box IntroductionMinimum System Requirements ProFire 610 FeaturesFront Panel Descriptions Controls and ConnectorsProFire User Guide Rear Panel Descriptions Hardware Connections Driver InstallationConnecting Line-Level Inputs Connecting Microphones and/or InstrumentsDigital S/PDIF Connections Headphone MonitoringConnecting the Analog Outputs Mixer Tabs Software Control PanelPan Level MeterMute SoloHosted Mode Sync Source Settings TabLevel Fader Channel NameHosted Mode Asio / WDM Buffer Size AHosted Mode Sample RateStandalone Mode Sync Source Standalone Mode Sample RateMixers Active at Sample Rates Above 96 kHz Master Volume KnobFile About TabAdditional Functions View EditHelp Setting Input Levels Using ProFireLine Inputs Pdif inputsSetting the sample rate and bit depth of your session Configuring your Audio SoftwareSelecting ProFire 610 as the audio device Routing your software outputsTab Name Output of this tab is routed to About Overdub Recording and Monitor MixingUsing the Monitor Mixer ProFire User Guide Standalone Operation Digital Clocking Scenario 1 ProFire 610 as Clock Master Scenario 2 ProFire 610 Slaved to S/PDIF Input ProFire 610 Master Digital Effects Processor Slave ProFire 610User Guide If you have no sound TroubleshootingIf you are experiencing clicks and pops in your recordings Warranty Terms Warranty Registration WarrantyAudio USA
Top Page Image Contents