User Guide | 31 |
Layer Mode
In Layer Mode,
‣To turn on Layer Mode:
Function
Press the Layer button.
The LCD’s top line will show the Main Voice (first) and the Layer Voice (second). The bottom line will show the tempo and the Layer Voice volume.
LAYER
Main Voice | Layer Voice |
Grd Pno + Strings | |
Tem:120 | Vol:127 |
Tempo | Layer Voice |
Volume4 |
4In most cases, the number in the lower right corner of the LCD represents the current value of the Data Control knob.
While in Layer Mode, the Data Control knob defaults to controlling the Layer Voice Volume. However, if you have assigned the Data Control knob to control a different function, the value for your custom setting will be displayed instead of the Layer Voice Volume. For information on how to assign the Data Control knob to control different functions, see the “Data Control Assign” section in Chapter 9: MIDI Functions.
Please note that polyphony may be reduced while Layer Mode is in use.
‣To change the Main Voice:
Press a Voice Select button.
Voice Select