M-Audio DCP-300 manual Transpose Buttons, ‣ To use the Transpose Function

Page 38

38 DCP-300

User Guide

Transpose Buttons

The Transpose Up and Down buttons are used to increase or decrease the keyboard’s transpose value, up to 12 semi-tones (one octave) up or down.

‣To use the Transpose Function:

TRANS

Each time you press the Transpose Up button, the pitch is raised by one semi-tone. In the same way, the Transpose Down button is used to lower the pitch in semi-tone increments.

Once you have changed the Transpose setting, the LCD will show a positive or negative value to the right of the voice name:

Grand Piano +05	Transpose
Tem:120 Vol:127	Value

‣To reset the Transpose setting back to its default value of zero:

Press the Transpose Up and Transpose Down buttons at the same time.

✔ Note: Changes to the Transpose setting are not remembered after a power-cycle. The setting will be back at its default value of zero at power-up.

Image 38

Contents User Guide Table of Contents Care and Maintenance Troubleshooting Appendices What’s in the Kit FeaturesIntroduction Controls and Connectors Right PanelControl Panel Voice Select Connections Panel Rear PanelConnect the Pedal Board Using DCP-300 for the First TimeConnect the Power Cable Turn the Power On Set a Comfortable Volume Level Pedal board has three pedals Connect HeadphonesUsing the Pedals Selecting Different Sounds Press the Bank buttonPress the Demo button to enter Demo Mode Additional FeaturesPlaying the Demo Songs Demo Play Mode Press one of the Voice Select buttons to select a demo songPress the Metronome button Using the MetronomePress the Demo button Metronome will sound and the LEDMetronome Volume TempoTime Signature Record button again to stop recording Using the Song Recorder Song Record ModeStart playing the keyboard. Recording starts as ‣ To erase clear a track Song Playback Press the Play button to begin playbackWhen you are finished playing, press Punch Press the Play buttonPlay the keyboard to record your new performance To stop recording, press the Record button againUsing the Reverb Effect Press the Reverb buttonRoom Hall Plate Delay Pan Delay Following Reverb Types are availableUsing the Chorus Effect Chorus FB Chorus Flanger Short Delay FB Delay Following Chorus/Effect Types are availableUp.Bass Vol127 Split ModeGrand Piano Eb3 Press the Split buttonDCP-300 Press the Split button to turn off Split ModeDefault values for Split Mode are Press the Split button againPress a Voice Select button Layer ModePress the Layer button Use the Data Control knob to adjust the volume Press the Layer button to turn off Layer Mode Using Split and Layer Modes Together ‣ To change the Split Voice ‣ To change the Split Voice Volume Layer Mode Transpose Buttons ‣ To use the Transpose FunctionOctave Function Press the Chorus and Touch buttons at the same time Same time to enable the Master Tune functionMaster Tune Press the Chorus and Touch buttons atTouch Normal Touch Select ModeTouch button to enter Touch Select Mode With the Touch button lit, press and holdFixed Level Method 2 Factory Reset Resetting DCP-300 What to do if you need to Start OverMethod 1 Piano Reset Press the Reverb and Chorus buttons at the same timeWindows Using your Digital Console Piano with a ComputerComputer System Requirements MacConnecting DCP-300 to your Computer Connecting the DCP-300 Auxiliary Input File playing through the DCP-300 Speakers at a comfortable listening levelInstalling Sibelius First Software Running Sibelius First Software DCP-300 User Guide On Windows computers On MacLocal OFF Midi FunctionsLocal On/Off LocalMidi Channel Midi ChanData Control Assign Care and Maintenance TroubleshootingAppendices Appendix a DefaultsParameter Factory Default Retained on Power-Down Reverb and Chorus Defaults Appendix B Midi Implementation Function… Transmitted Recognized RemarksAppendix C Data Control Assignments and Midi CC List MSBEffect Control 1 fine Warranty Registration WarrantyWarranty Terms Audio UK