M-Audio 61 manual Recording from a Microphone to an Audio Track, Usb

Page 18

ProKeys Sono 61 User Guide

17

Recording from a Microphone to an Audio Track

Song1

12:02:101

Add A Track

2

4

6

8

10

12

14 16 18 20

22

24

26

28

30

Mic

Audio

USB

USB

Out

Instr

Audio Out

Aux

Audio

Stereo

Out

Virtual

Audio

Inst

MIDI Active

Out

Sono 61

Voices

MIDI

MIDI Active

Sono 61

MIDI

MIDI

Output

MIDI Active

Recording Software

USBUSB

		Powered
ProKeys Sono 61	Microphone	Monitors
	Microphone

In this scenario, ProKeys Sono is being used as an audio interface to record a microphone:

The microphone’s output signal is received at the microphone (XLR) input jack on ProKeys Sono and sent to the computer through the USB connection.. Sequencer software running on the computer can then capture the microphone signal on one of its mono audio tracks (the track is labeled “Mic” in the illustration above)..

This signal can be monitored while recording or played back after it has been recorded.. Monitoring can take place over powered speakers (connected to the 1/4” main output jacks on the rear panel) or by headphones (connected to either one of the 1/4” headphone jacks on the front panel)..

Keep in mind that—depending on how the Mono button is configured to function—the microphone input routing can be altered to make the microphone appear on both channels (one and two) of a stereo track (i..e.., “centered” in the stereo field).. This functionality may be helpful in direct monitoring situations where headphones are being used.. To learn more about this, see the section titled “The Mono Button” within the “ProKeys Sono Audio Setup and Controls” section of this User Guide..

TIP: Signal from the ProKeys Sono microphone input is usually available on input channel one within your recording software. To record from a microphone, this mono audio track must be configured to receive signal from audio input channel one. See your audio application’s documentation to learn how to configure an audio track.

TIP: When recording with a microphone in your studio, it is recommended that you turn off your speakers and monitor through headphones. This prevents feedback loops which may be very loud and can damage your equipment or harm your hearing.

Image 18

Contents Sono ProKeys Sono Audio Control Panel Windows Only ProKeys Sono 61 User GuideProKeys Sono 61 User Guide Introduction Keyboard ProKeys Sono 61 FeaturesWhat’s in the Box? Built-in Audio InterfaceStandalone Operation Bus-Powered Operation Minimum RequirementsControls and Connectors Top Panel Diagram Top Panel DescriptionsProKeys Sono 61 User Guide Rear Panel Descriptions £Ç £n £™ Óä Ó£ ÓÓ ÓÎ Ó Óx ÓÈAudio Outputs Hardware ConnectionsAudio Inputs Midi ConnectionsExample Setup #1 Example Operating ScenariosExample Setup #2 About the audio inputsProKeys Sono GM sound selection ProKeys Sono as a Standalone InstrumentProKeys Sono Premium Voice Selection To return the Data keys to control the octave shift valueProKeys Sono Demos 0OWERED Onitors DapterBasic ProKeys Sono Setup in Windows Low latency software monitoringProKeys Sono Setup in Mac OS Using ProKeys Sono with a Computer Audio TracksRecording from a Microphone to an Audio Track USBRecording an Instrument to an Audio Track Recording the Aux Inputs to an Audio Track Midi Tracks Recording Midi and triggering sounds on a virtual instrumentPowered Monitors ProKeys Sono Port ProKeys Sono Audio Setup and Controls Using the Microphone and Instrument InputsSetting Input Gain Using the Aux Inputs Using Direct MonitoringMono Button ProKeys Sono Audio Control Panel Windows Only LatencyAbout Routing Midi Data to and from your Computer £ ÎRouting Midi Signals to your Software Routing Midi Signals from your SoftwareSending Midi to the ProKeys Sono sound engine Advanced ProKeys Sono Functions in Edit Mode Audio Options in Edit ModeMono Input Record Key Data Octave button Assignment Overview Button, Knob, Wheel and Pedal Jack AssignmentsUSB Record Key To select alternate Data button functionsData Button Assignment Options To assign the Data and buttons to transposeProgram Change To assign the Data and buttons to send bank change messagesSome examples of useful Midi CCs are To re-assign the Modulation wheel to its default functionWheel Assignment To assign a Midi controller message to the Modulation wheelPedal Assignment To re-assign the Sustain Pedal jack to its default functionTo re-assign the Voice Volume knob to its default function Knob AssignmentProKeys Midi Output Settings Restoring Default AssignmentsVel Curve Selection Midi Out Mode Key Local On/OffTo send data on channel Sending a Bank Change or Program Change Message To send a specific program change message in Edit modeTo send a single bank change in Edit mode PanicMidi Messages In-Depth Program & Bank ChangesNRPN/RPNs Troubleshooting ProKeys Sono 61 User Guide Appendices Useful Midi Data Appendix a General Midi InstrumentsThese sounds are ProKeys Sono premium-quality voices Appendix B Channel 10 Drum Map Key# Drum SoundAppendix C Standard Midi Controller Numbers Midi CCs RPN MSBAppendix E Piano Reset Button Appendix D Additional RPN MessagesTechnical Specifications Mic InputsWarranty Warranty Terms Warranty RegistrationTechnical Info 080905PKS61UGEN01

Related manuals

Manual 49 pages 7.3 Kb

Manual 12 pages 3.99 Kb