Operations
Recharging the Batteries
To recharge:
•Place the mics in the charger compartments on top of the
•Make sure to position the mics with the power switch facing out towards the front of the receiver.
•The charging LED on the receiver will light up when the mic is inserted correctly.
NOTE: The LED will not light up until the mic is inserted in the correct direction. Mics will charge even if receiver is turned off.
|
| CHANNEL A |
|
|
| CHARGING | CHARGING |
POWER | ANT. A |
Balancing the Volume
UH
POWER
ON
OFF
CHANNEL B
ANT. B
Use the mic volume controls on the front to adjust the balance of the two mic channels. Turn the controls clockwise to raise the volume and
| CHANNEL A |
|
| CHANNEL B |
|
| CHARGING | CHARGING |
|
POWER | ANT. A | ANT. B |
12