Roland VR-760 owner manual Recording the Performance, About the Local Control

Page 80

Connecting External MIDI Devices

■Recording the Performance

Use the following procedure when recording to an external

sequencer.

1.Turn on the external sequencer’s Thru function.

For details, refer to the following section “About Local Control.”

Refer to your sequencer owner’s manual for instructions on how to carry out this procedure.

2.Select the Registration for the performance to be recorded.

For instructions on selecting the Registration, refer to p. 29.

3.Make the VR-760’s MIDI settings.

Use the procedure described in the previous section

“Settings for Recording” (p. 79) to make the settings.

4.Begin recording with the external sequencer.

5.Bulk Dump the Registration.

Using the Utility Bulk Dump Temporary in Edit mode, transmit the contents of the selected Registration to the external sequencer.

For instructions on carrying out this operation, refer to

“Transferring the VR-760’s Settings to an External MIDI Device (Bulk Dump)” (p. 76)

6.Perform on the VR-760.

7.When the performance is finished, stop recording with the external sequencer.

You can then listen to the recorded performance by playing it back on the external sequencer.

■About the Local Control

The switch that connects and disconnects the MIDI connection between the keyboard controller section and the sound generator section (p. 23) is called the Local switch. Since essential information describing what is being played on the keyboard won’t reach the sound generator if the Local switch is set to OFF, the Local switch should normally be left ON.

However, if while performing you want to send that performance data to an external sequencer as MIDI messages to be recorded, you then perform with the externally connected MIDI sequencer set to MIDI Thru (whereby data received from MIDI IN is then output from the MIDI OUT with no changes made to the data) and the VR-760 set to Local Switch to off.

Recording Sequencer

MIDI Thru: On

MIDI IN MIDI OUT

MIDI OUT

MIDI IN

 

 

 

Sound

 

 

Generator

 

Local Switch: Off

Section

 

 

Keyboard Controller

 

 

Section

 

 

 

VR-760

In this case, the data sent over two paths, i.e., the data sent directly from the keyboard controller section and the data sent from the keyboard controller section via the external sequencer, ends up being sent to the sound generator section simultaneously. Thus, for example, even when you play a “C” key only once, the note “C” cannot be sounded correctly, as the sound is played by the sound generator section twice.

80

Page 79 Page 81
Image 80
Page 79 Page 81
Contents Page Important Safety Instructions Page Page Power Supply PlacementMaintenance Additional PrecautionsInstalling the card protector Before Using CardsUsing Data Cards Emphasis on Basic Keyboard Functions for Stage Use Main FeaturesOther Features Contents Using the D Beam Controller to Produce Common Effects About the Edit Mode MenuBasic Operation of the Piano Part Basic Operation of the Synth PartMidi Settings that Act on the VR-760 Globally System Midi Settings of Registration Registration CommonOrgan Settings for Registrations Registration Organ Piano Settings for Registrations Registration PianoControlling External Midi Devices with the VR-760 Recording VR-760 Performances to an External Midi SequencerPanel Descriptions Front PanelPanel Descriptions Organ SectionSynth Section Rear Panel Pedal Jacks DAMPER, EXP, ControlConnecting the Power Cord Before You Begin PlayingConnecting the VR-760 to External Equipment Before You Begin PlayingBefore you begin making connections, confirm Following Connect the VR-760 and the external deviceInstalling the Music Stand Connecting PedalsTurning the Power On and Off Turning On the PowerTurning Off the Power Unit is powered up, and the display’s backlighting comes onAdjust the volume using the Master Volume knob Adjusting the VolumeRestoring the Factory Settings Factory Reset Press the Enter button Adjusting the Display Contrast LCD ContrastPress Cursor button to display the Factory Reset screen You are returned to the basic screen Tuning to Other Instruments’ Pitches Master TuneEdit’s System Basic screen appears Overview of the VR-760 Basic organization of the VRKeyboard Controller Section Sound Generator SectionComposition of the VR-760’s Parts Tones and MemoriesBasic Screen Rules Basic Operation of the VRMain Screens About the Controller Section Controlling Parts RegistrationsSong Name Composer Copyright Listening to the Demo SongsDisplay returns to its previous screen Button Tone Performing with the KeyboardPress the ONE Touch Organ button Performing with a Variety of Tones Example Call up to RegistrationPerforming with the Keyboard Release the Bank button and press the Registration ButtonChanging the Volume Level of Each Part Press the Reverb Type button to switch the reverb typesAdding Reverberation to the Sound You can select from the following three typesBender/Modulation Lever Using the ControllerChanging the Overall Tone Quality Master EQ Aftertouch Damper PedalExpression pedal Control PedalBasic Operation of the Organ Part Harmonic Bars That Change the Composition of the Organ Tone5th Root Bar Manual button Performing with the Keyboard What Are Feet?Organ Section Changing the Organ Sound Tone WheelChanging the Wheel Type Press the Tone Wheel button to select the type of toneAdding Modulation to the Sound Vibrato and Chorus Leakage NoiseV-2 C-2, C-3This button switches Second Percussion on/off This button switches Third Percussion on/offAdding Crispness to the Sound Percussion Second Second Percussion buttonSwitches the volume of the percussion Performing with the Keyboard Soft Soft Percussion buttonPercussion on a tone wheel organ Single Trigger Algorithm Switches the speed at which the percussion sound will decayPerforming with the Keyboard Slow Slow Percussion button Turn the Overdrive knob to adjust the amount Changing the Virtual Amp AmplifierChanging the Virtual Amp Press the Amplifier button to select the type of virtualAdding the Rotary Speaker Effect Rotary Sound Rotary on buttonSLOW/FAST button Brake buttonBasic Operation of the Piano Part Tones That Change the Piano ToneChanging the Characteristics of the Sound Mic/Amp Mic ModelingAmp Modeling Press the Type button to select the typePhaser Applying Effects to the Sound Multi EffectsChorus TremoloBasic Operation of the Synth Part Tones That Change the Synth ToneSelecting Wave Expansion Board Tones Press the or + button located above SRX Expansion buttonMaking Changes to the Tones Tone Modify Synth Part pAdding Expression to the Sound Active Expression OFFFade TimbreUsing the Advanced Functions Using the D Beam Controller to Produce Common EffectsPlace your hand over the D Beam controller Effects ExplanationTo Adjusting Sensitivity of the D Beam Adjusting the Sensitivity of the D Beam ControllerUsing the Advanced Functions Press the Split button to make its indicator light Dividing the Keyboard SplitPlaying Rhythm Rhythm Style Beat MeasureChanging the Rhythm Pattern and Tempos Press the Rhythm on buttonPress Cursor button to go to the Rhythm screen Rhythm begins playing Following display is appearScreen like the one shown below appears Saving Settings to RegistrationsPress the Write button Using a Control Pedal Simple Method for Storing to RegistrationsSaving to the Memory Card Formatting the Memory Card for the VR-760 Format Press Cursor button to display the following screenAvailable characters/symbols Saving Data to Memory Card Save FileRepeat steps 4-5 to input the name You can use up to eight characters in naming a fileLoading a File from Memory Card into the VR-760 Load File Renaming a File Saved to the Memory Card Rename FilePress the Cursor button to select file This function rename file saved to the memory cardDeleting a File Saved to the Memory Card Delete File Rename filePress the Cursor buttons to select file Press the Enter button to delete fileControlling an External Video Device V-LINK Connection Example Using the DV-7PRWhat is V-LINK? Switching Images with the Keyboard How to Use the V-LINK FunctionSwitching Images with the Registration Buttons Detailed Settings for Each Function Edit About the Edit Mode MenuSystem Basic System MidiDetailed Settings for Each Function Edit Registration OrganRegistration Piano Registration SynthBasic Procedure Settings Affecting the Overall VR-760 System BasicChanging the Clock Timing Source Setting the Organ’s Quick Firing Keyboard FunctionSetting the Keyboard Video Switching During V-LINK Setting the Device ID Number Midi Settings that Act on the VR-760 GloballyConnecting/Disconnecting the Sound Generator and Keyboard Setting the Midi Channel for Each Part Switching Rotary Effect MessagesSettings of Registration Changing the Pitch Bender Settings Setting of RhythmTransmitting Midi Tone Data When Switching Registrations Changing the Sensitivity of AftertouchOrgan Settings for Registrations Settings the Spread of the Speaker Settings the Speaker Volume LevelSetting the Rotary Shift Time Setting the Distance from the Rotary Speaker to the MicPiano Settings for Registrations Synth Settings for Registrations Playing Sound MonophonicallySettings Multi-Effect of Synth Part Connect the VR-760 to Your Sequencer Checking the Installed Wave Expansion Boards SRX InfoConvenient Functions Utility Bulk Dump Temp Bulk Dump All Message indicating that it is completed appearsUsing a Memory Card Factory ResetConnecting External Midi Devices Connecting to External SequencerSettings for Recording Recording VR-760 Performances to an External Midi SequencerConnecting External Midi Devices Recording the PerformanceAbout the Local Control VR-760Setting the Channels Switching RegistrationsMaking Connections Selecting VR-760 Sounds from An External Midi DeviceSettings for Controlling an External Midi Device Connecting External Midi Devices Switching TonesPC Variation Variation button’s indicator Off Red Green Controlling External Midi Devices with the VR-760Installing the Wave Expansion Board Installing SRX Series BoardsChecking the Installed Wave Expansion Boards Installing the Wave Expansion BoardInstallation de la carte d’extension Wave French language for Canadian Safety StandardVérification des cartes d’extension audio aprés installation Turning On the Power pTroubleshooting Problem Check SolutionTroubleshooting Piano VOLUME, Synth VolumeAppendices Messages and Error Messages Message Meaning ActionPhaser Effects/Parameter ListOverdrive DistortionEnhancer Auto WAHCompressor RotaryStereo Delay SPACE-DStereo Chorus 15 ST.FLANGER Stereo FlangerEffects/Parameter List MOD Delay Modulation Delay TRI TAP DLY Triple Tap DelayQuadruple Tap Delay Quad TAP DLYEffects/Parameter List Time Ctrl DLY Time Control Delay FBK PCH Shift Feedback Pitch ShifterReverb 22 2V PCH Shift 2-voice Pitch ShifterOD Delay Overdrive Delay Gated ReverbOD Flanger Overdrive Flanger OD Chorus Overdrive ChorusDist Flanger Enhancr Delay Chorus DelayFlanger Delay CHORUS/DELAYFLANGER/DELAY CHORUS/FLANGERTone List Rhythm Set ListPiano Tone Synth ToneSettings You Can Alter and Store Settings Stored to the SystemSettings Stored to the Registration 100Shortcut List 101Midi Implementation Receive data102 Channel Voice Messages Note offMidi Implementation 103Channel Mode Messages 104System Exclusive Message 105System Realtime Message Data set 1 DT1 Data Transmission Channel Voice Messages Note off106 107 System Realtime MessagesStart Stop108 System Exclusive MessagesUniversal Non-realtime System Exclusive Message Identity Reply MessageMidi Implementation Parameter Address Map 109110 Registration SynthExamples of Actual Midi Messages 111Decimal and Hexadecimal Table How to calculate the checksum 112Example of an Exclusive Message Calculating a Checksum Ascii Code TableMidi Implementation Chart 113Specifications 114Index 115116 117 Information AfricaAvis 03128590 ’03-6-5N

VR-760 specifications

The Roland VR-760 is a versatile stage keyboard designed to cater to the requirements of both live performers and studio musicians. With a blend of organ sounds, electric pianos, and synthesizer textures, the VR-760 stands out for its exceptional sound quality and user-friendly interface.

One of the standout features of the VR-760 is its extensive collection of sounds optimized for live performance. It comes equipped with a sophisticated organ section that offers a range of vintage and modern tones. Musicians can achieve classic rotary speaker effects, which are essential for creating an authentic organ sound. The keybed is designed for expressiveness, ensuring that all nuances are captured, making it ideal for dynamic playing.

Additionally, the VR-760 features high-quality electric pianos that replicate the sounds of legendary models. With an expansive library of piano sounds, the keyboard allows for seamless transitions between soft ballads and powerful driving riffs, catering to various genres. The layered sound functionality enables users to combine multiple sounds for a richer audio experience.

The synthesizer section of the VR-760 includes extensive waveform options and modulation capabilities. Users can explore a wide range of synthesis styles, allowing them to manipulate sounds in real-time during performances. The advanced sound engine ensures that the sounds generated remain rich and full, even when heavily modulated.

Another key highlight of the VR-760 is its built-in effects processing, which includes reverb, delay, and chorus settings. These effects can be easily applied to enhance the overall sound output, providing a higher level of polish without the need for external equipment. The intuitive interface allows performers to adjust these effects quickly, ensuring seamless transitions between different sounds and styles during a live show.

Portability is also a major benefit of the Roland VR-760. Weighing in at a manageable size, it is suitable for gigging musicians who travel frequently. The robust construction ensures that it can withstand the rigors of the road while delivering reliable performance night after night.

Lastly, the VR-760 offers seamless connectivity options, including MIDI and USB ports. This makes it easy to integrate with other devices, such as computers or external sound modules, enhancing its versatility in both performance and recording setups.

In summary, the Roland VR-760 combines powerful sounds, user-friendly controls, and portable design, making it a standout choice for musicians seeking a high-quality stage keyboard that does not compromise on performance.
Top Page Image Contents