§ 1 Warranty

[10 ]

EUROPOWER PMP960M/PMP980S/PMP1280S User Manual

Warranty

[1]� This limited warranty is valid only if you purchased the product from a BEHRINGER authorized dealer in the country of purchase. A list of authorized dealers can be found on BEHRINGER’s website www.behringer.com under“Where to Buy”, or you can contact the BEHRINGER oce closest to you.

[2]BEHRINGER* warrants the mechanical and electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of purchase (see the Limited Warranty terms in § 4 below), unless a longer minimum warranty period

is mandated by applicable local laws. If the product shows any defects within the specied warranty period and that defect is not excluded under § 4, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned product or parts. In case BEHRINGER decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e., one (1) year (or otherwise applicable minimum warranty period) from the date of purchase of the original product.

[3]Upon validation of the warranty claim, the repaired or replacement product will be returned to the user freight prepaid by BEHRINGER.

[4]Warranty claims other than those indicated above are expressly excluded.

PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE.

§ 2 Online registration

Please do remember to register your new BEHRINGER equipment right after your purchase at www.behringer.com under“Support” and kindly read the terms and conditions of our limited warranty carefully. Registering your purchase and equipment with us helps us process your repair claims quicker and more eciently. Thank you for your cooperation!

§ 3 Return authorization number

[1]� To obtain warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may contact the BEHRINGER distributor for your country listed under“Support” at www.behringer.com. If your country is not listed, please check if your problem can be dealt with by our“Online Support” which may also be found under“Support”

at www.behringer.com. Alternatively, please submit an online warranty claim at www.behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product. After verifying the product’s warranty eligibility with the original sales receipt, BEHRINGER will then issue a Return Materials Authorization (“RMA”) number.

[2]Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by BEHRINGER.

[3]Shipments without freight prepaid will not be accepted.

§ 4 Warranty Exclusions

[1]� This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries. Where applicable, BEHRINGER warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase.

[2]This limited warranty does not cover the product if it has been electronically or mechanically modied in any way. If the product needs to be modied or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modication/adaptation shall not be considered a defect in materials or workmanship. This limited warranty does not cover any such modication/adaptation, regardless of whether it was carried out properly or not. Under the terms of this limited warranty, BEHRINGER shall not be held responsible for any cost resulting from such a modication/adaptation.

[3]This limited warranty covers only the product hardware. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product. Any such software is provided“AS IS” unless expressly provided for in any enclosed software limited warranty.

[4]This limited warranty is invalid if the factory-applied serial number has been altered or removed from the product.

[5]Free inspections and maintenance/repair work are expressly excluded from this limited warranty, in particular, if caused by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts.

[6]Damage/defects caused by the following conditions are not covered by this limited warranty:

•improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals;

•connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used;

•damage/defects caused by acts of God/Nature (accident, re, ood, etc) or any other condition that is beyond the control of BEHRINGER.

[7]Any repair or opening of the unit carried out by unauthorized personnel

(user included) will void the limited warranty.

[8]If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the limited warranty, the inspection costs are payable by the customer.

[9]Products which do not meet the terms of this limited warranty will be repaired exclusively at the buyer’s expense. BEHRINGER or its authorized service center will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notication, BEHRINGER will return the unit C.O.D. with a separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer has sent in a written repair order.

Authorized BEHRINGER dealers do not sell new products directly in online auctions. Purchases made through an online auction are on a“buyer beware” basis. Online auction conrmations or sales receipts are not accepted for warranty verication and BEHRINGER will not repair or replace any product purchased through an online auction.

§ 5 Warranty transferability

This limited warranty is extended exclusively to the original buyer (customer of authorized retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc.) shall be entitled to give any warranty promise on behalf of BEHRINGER.

ENGLISH

PMP980S, PMP1280S specifications

Behringer, a renowned name in audio equipment, offers an impressive lineup of powered mixers, notably the PMP1280S and PMP980S. These versatile mixing consoles are designed to cater to musicians, bands, and live sound engineers who require robust performance and user-friendly features in a compact format.

The Behringer PMP1280S is a powerful 12-channel powered mixer featuring an impressive total power output of 2 x 800 watts. This translates to ample headroom and clarity for live performances, ensuring that sound remains pristine, even at higher volumes. The mixer includes 8 mono channels with 3-band EQs, providing artists with control over their sound while maintaining simplicity. Each channel also features a built-in compressor to smooth out dynamic peaks and ensure a more consistent output. The PMP1280S is equipped with various onboard effects, including reverb, delay, and modulation, making it easier for users to enhance their sound without needing additional equipment.

On the other hand, the PMP980S, a slightly smaller powered mixer, boasts 8 channels and a power output of 2 x 500 watts. It retains many of the features found in the PMP1280S, including the 3-band EQ per channel, but is designed for those who need a more lightweight solution without sacrificing sound quality. This model also comes with built-in effects and a simple layout that makes it accessible for live performances, rehearsals, or presentations.

Both mixers utilize Behringer's proprietary Ultra-low Noise preamps, which are designed to produce high-quality audio while reducing unwanted noise. Moreover, the mixers feature a 24-bit digital effects processor, allowing users to create stunning sonic landscapes in real-time. Connectivity is another strong point, with multiple inputs and outputs, including XLR and TRS options for versatile integration with microphones and instruments.

The redundancy in power supply and thermal protection systems ensures that users can rely on these mixers during critical performances. Whether you're in a small venue or a larger space, both the PMP1280S and PMP980S provide exceptional performance, reliability, and a host of features that make them suitable for various audio applications.

In conclusion, Behringer's PMP1280S and PMP980S exemplify the brand's commitment to delivering professional-grade audio solutions that meet the diverse demands of modern audio professionals. With their powerful outputs, versatile effects, and high-quality components, these mixers are excellent choices for anyone looking to elevate their sound experience.