Behringer ddx3216 specifications Specifications

SPECIFICATIONS

Mono inputs 1-12
Microphone input
Type	electronically balanced,
	discrete input stage
Connector	XLR
Gain	+10 to +60 dB (PAD = -20 dB)
Input impedance	approx. 1,5k Ω @ 1 kHz
THD + Noise	0.05 %, 20 Hz to 20 kHz, +60 dB
	gain, -42 dBu at input
Max. input level	+1 dBu (minimum gain)
S/N ratio	95 dB, 20 Hz to 20 kHz, gain 1,
	0 dBu at input
Equivalent noise	-90 dB, 20 Hz to 20 kHz, input
	termination: 150 Ω
Crosstalk	< -85 dB (channel 1 against chan-
	nel 2), +60 dB gain, -42 dBu at input
Line input
Type	electronically balanced
Connector	1/4" TRS connector
Gain	-10 to +40 dB (PAD = -20 dB)
Input impedance	approx. 16k Ω @ 1 kHz
THD + Noise	0.02 %, 20 Hz to 20 kHz,
	+20 dB gain, -20 dBu at input
Max. input level	+24 dBu (minimum gain)
S/N ratio	92 dB, 20 Hz to 20 kHz,
	gain 1, 0 dBu at input
Equivalent noise	-88 dB, 20 Hz to 20 kHz,
	input termination: 150 Ω
Crosstalk	< -90 dB (channel 1 against chan-
	nel 2), gain 1, 0 dBu at input
Stereo inputs 13-16
Type	electronically balanced
Connector	1/4" TRS connector
Gain	-20 to +20 dB
Input impedance	approx. 20k Ω @ 1 kHz
THD + Noise	0.015 %, gain 1, 0 dB at input,
	measured at main out
Max. input level	+22 dBu (minimum gain)
S/N ratio	86 dB, 20 Hz to 20 kHz, gain 1
(measured at main out)
Equivalent noise	-85 dB, 20 Hz to 20 kHz,
(measured at main out)	input termination: 150 Ω
Crosstalk	< -85 dB (channel 13 against chan-
(measured at main out)	nel 14), gain 1, 0 dBu at input
Main outputs
Type	servo-balanced
Connector	XLR
Output impedance	approx. 160 Ω @ 1 kHz
Max. output level	+16 dBu
Multi outputs
Type	servo-balanced
Connector	1/4" TRS connector
Output impedance	approx. 160 Ω @ 1 kHz
Max. output level	+16 dBu
Control Room outputs
Type	servo-balanced
Connector	1/4" TRS connector
Output impedance	approx. 160 Ω @ 1 kHz
Max. output level	+16 dBu
S/PDIF digital input/output
Input
Connector	RCA
Special feature	Sample rate converter
	(32 to 50 kHz)
Output
Connector	RCA
Dither	16, 20 and 24 bits
Special feature	Noise shaping

Wordclock input/output
Input
Connector	BNC
Input impedance	20 kΩ
Output
Connector	BNC
Output impedance	30 Ω
Signal type	TTL level square wave
SMPTE input
Connector	XLR
Input impedance	20k Ω
RS232 port
Connector	9-pin DIN jack
Transmission	115,200 bauds, 8 data bits,
	1 stop bit, no parity
System specifications
Sampling rate	44.1 and 48 kHz
	(internal and external)
Signal delay	<1.6 ms at 48 kHz, channel input
	against main out
Frequency response	20 Hz to 20 kHz, +/- 0.1 dB
Faders
Type	100-mm ALPS® motorized faders
Resolution	+12 from 0 to -oo dB
	(256 increments)
Converters
A/D converters
Resolution	24-bit delta-sigma AKM®
Oversampling	128 times
Dynamic range	116 dB typ.
D/A converters
Resolution	24-bit delta-sigma CRYSTAL®
Oversampling	128 times
Dynamic range	106 dB typ.
MIDI interface
Type	5-pin DIN jacks
Connectors	MIDI IN, MIDI THRU and MIDI OUT
Level meters
Channel	16-digit LED display
Main	2 x 16-digit LED display
Special feature	Peak-hold function
	(off, 0-29 s, and oo)
Mono inputs 1-12, microphone	(minimum gain)
Sig LED	-46 dBu at input
Clip LED	0 dBu at input
Mono inputs 1-12, line	(minimum gain)
Sig LED	-25 dBu at input
Clip LED	+23 dBu at input
Stereo inputs 13-16	(gain at center position)
Sig LED	-36 dBu at input
Clip LED	+10 dBu at input
Accessories
ADT1616	16(2x8)inputsand16(2x8)output,
	ADAT® digital interface (optical)
TDIF1616	16(2x8)inputsand16(2x8)outputs,
	TDIF digital interface (25-pin D-Sub)
AES808	8 inputs and 8 outputs, AES/EBU
	digital interface (25-pin D-Sub)
ACB808P	19" interface box for AES808, with
	4 x XLR inputs and 4 x XLR outputs
Power supply
Power consumption	approx. 68 W
Fuse	100 to 240 V ~: T 4 A H
Mains connector	Standard IEC receptacle
Physical
Dimensions (H * W * D)	approx. 6 ½" x 17 ¼" x 22 ½"
	(163 mm x 438 mm x 572 mm)
Weight (net)	approx. 29 ¾" lbs (13.5 kg)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

3