EURORACK UBB1002
FOREWORD
Dear Customer,
I’m sure you’re one of those people who have devoted themselves body and soul to your chosen area and no doubt this has transformed you into an expert in your field!
Well, for over 30 years, my passion has been music and electronics. This not only led me to establish BEHRINGER, but also enabled me to convey and share my enthusiasm with my employees.
During all the years I’ve been involved with studio technology and end users,
Ihave developed a feel for the things that really count, such as sound quality, reliability and ease of use. What’s more, I have always had the desire to push the boundaries of technical possibilities to the extreme.
It was precisely this motivation that prompted me to start work on a new series of mixing consoles. Since our EURORACKs had already set new standards
Thus, the concept and design of the new UB mixing consoles bear my signature. The design work, the entire circuit diagram and PCB development, and even the mechanical concepts are my own work. I carefully selected each individual component— with the aim of pushing the mixing consoles’ analog and digital technologies to their limits.
My vision was to enable you, the user, to give free rein to your true potential and creativity. The result is incredibly powerful mixing consoles that offer intuitive operation. They cannot fail to impress with their extremely flexible routing possibilities plus fantastic wealth of functions.
Your new UB mixing console is of high quality yet is simple to use; you’ll soon appreciate that I, both personally and in my capacity as musician and sound engineer, put you, the end user, first and that these products were only possible because of the passion and the attention to detail that went into them.
Thank you for the confidence you have placed in us by purchasing the UB mixing console. I should also like to thank all those who, with their personal commitment and passion, have helped me realize this impressive series of mixing consoles.
Kindest regards,
Uli Behringer
TABLE OF CONTENTS
1. INTRODUCTION | 4 | ||
1.1 | Before you begin | 4 | |
1.2 | Power supply | 4 | |
1.3 | Control elements | 5 | |
| 1.3.1 | Interface panel | 5 |
| 1.3.2 | Front panel | 5 |
| 1.3.3 | Main section | 5 |
2. WIRING | ....................................................................... | 6 | |
3. SPECIFICATIONS | 6 | ||
4. WARRANTY | 7 |
1. INTRODUCTION
Congratulations! With the UBB1002 you have purchased a
In combination with its comprehensive range of features and
1.1 Before you begin
Your EURORACK UBB1002 was carefully packed in the factory and the packaging is designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred during transit.
+If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.
Be sure that there is enough space around the unit for cooling and please do not place the UBB1002 on
1.2 Power supply
There are two options for operating the UBB1002: When using mains power, make sure the console is switched off before you connect it to the power supply. Then, connect it to the mains
and switch the UBB1002 on, using switch on the rear. Please note that the console and its power supply will get warm during operation, which is completely normal. For battery operation, you’ll only need two commercial
+When the unit is not in use or operates from mains power, please remove the batteries!
4 | 1. INTRODUCTION |