Introduction
Product Overview (front)
Item |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
1 2 22 3
5
6
21
Button or Fader Scanner select buttons Scanner indicator LEDS Scene select buttons Channel faders
Page A Indicator LED Page B Indicator LED Page select button
Program button Music/Bank Copy button LCD display window Mode Indicator LEDS Bank Up button
Bank Down button Tap Display button
Blackout button
Midi/Add button
Auto/Del button
Chase buttons
Speed fader
Fog button
Strobe button
10 | 11 | 12 | 18 |
13
8
16
17
9
4 | 7 | 19 | 20 | 14 | 15 |
Function
Fixture selection
Indicates the fixtures currently selected
Universal bump buttons representing scene location for storage and selection
For adjusting DMX values, Ch 1~8 can be adjusted immediately after pressing the respective scanner select button, Ch 9~16 after pressing the Page select button Represents Ch 1~8 range selected
Represents Ch 9~16 range selected
In manual mode, press to toggle between pages of control or to select both pages simultaneously. Both LEDS on will allow control of both lower and upper range channel. Used to enter programming mode
Used to activate Music mode and as the copy command during programming Status window displays pertinent operational data
Provides operating mode status, (manual, music or auto)
Function button to traverse Scene/Steps in banks or chases
Function button to traverse Scene/Steps in banks or chases
This is a
Sets the shutter or dimmer value of all fixtures to “0” causing all light output to cease Activates MIDI external control and also used to confirm the record/save process Used to activate Auto mode and as the delete function key during programming Chase memory 1 ~ 6
This will adjust the hold time of a scene or a step within a chase
Also considered a
Built in Chauvet strobe controller
5 | Revised: |