Mono input module blocks are made up of assemblies of 8 channels. Each channel includes switches for; 48 volt phantom power, -25 dB pad and polarity in addition to a high quality mic pre-amp that features high headroom, high slew rate and excellent CMRR performance. Also provided on all mono inputs is a high-pass filter that is variable between 20 and 400 Hz.
Separate ¼ inch jacks are provided for a pre-EQ balanced send and a balanced return at a nominal level of +4 dBu. Insert on/off switching is also provided to allow permanent patching.
Four-band EQ is provided with sweep able high and low frequency points and selection between shelving and peak, full parametric control on the mid bands with frequency sweeps and Q control. The entire EQ circuit can be bypassed by disengaging the EQ ON Switch.
12 auxiliary sends are divided into 3 versatile sets. 1-4 being fixed mono sends with their own pre/post switch. 4-10 are switch able between dual mono and stereo with pre/post switches per pair and 11 & 12 are fixed stereo with pre and post selection for crucial “In ear monitoring” applications. The default “pre” selection is pre-fader/post EQ, but internal options allow this election to be changed to pre-EQ.
