Crest Audio CV 20 manual Divided into two types of channels

Page 6

Eight full-time stereo channels are provided standard on all CV20 frame packages with the ability to add more modules on custom frame packages. The stereo module is

divided into two types of channels.

The first four stereo input channels allow mic and line level inputs. Each of these channels feature switches for 48-volt phantom power, -25dB PAD and polarity. Included on each mic/line stereo inputs are two separate gain controls for Left and Right signals as well as Left/Right sum mono switches.

The second four stereo input channels allow patching of 2 separate stereo line signals. The first gain control is a stereo gain pot that controls the ¼ inch inputs and the second controls the RCA inputs for “set and forget” operation. Switching between the 2 inputs is via the Line 2 switch. A selectable HPF filter is also provided on all dual line inputs that can be selected between 75 and 150 Hz. Left/Right and Mono switching is also available as well as a pre-source balance pot to send a discreet blend of the stereo signal to the Auxes.

A four-band sweep able EQ is provided on all stereo inputs for full EQ control of stereo signals. The stereo inputs also provide 12 Auxiliary sends with the first 4 sends switch able to the Matrices. This allows the Matrix to be expandable from 11 x 4 to 19 x 4.

Bus/Mute and VCA assignments are just like the mono inputs. Monitoring is via the Solo bus and separate signal and peak displays for each channel.

Image 6
Contents Page Page Welcome to the CV-20 Page Mono Input Module Divided into two types of channels Stereo Input Module Page Master Module Block Meter Bridge Options and Accessories Additional information about the Midi controllersWeight