Lynx D AD 3220 B manual Settings and Control, Switch Settings

Reference Manual D AD 3220 B Version 1.0

Multiple Units

When installing multiple MiniModule units it is recommended you use the R FR 3005 Rack Frame 1 and / or R FR 3010 Rack Frame 2 options. Please refer to the documentation supplied with these options for details on electrical installation.

Settings and Control

The D AD 3220 B is configured via the integral 4- position dip-switch. This is located on the bottom of the module and can be accessed through the cutout provided (fig 2)

Channel 2 Status				Channel 1 Status
			DIP Switch
				OFF
				ON
	LED 2	1 2 3 4		LED 1

Switch Settings

Below the switch settings for the 4-position dip- switch are defined. Please see the section following the table for more detail on the switch function.

Switch	Setting	Function
1	ON	Enable Local Adjustment
	OFF	Disable Local Adjustment
2	ON	Dual 1 > 4 mode
	OFF	Single 1 > 8 mode
3	ON	Not Used
	OFF	Not Used
4	ON	Not Used
	OFF	Not Used

Page 15