Sharp HT-SB200 „ Driving screws, „ Wall mount angle fixed to the wall Horizontal position

Page 18

HT-SB200

ENGLISH

Speaker preparation (continued)

Preparation for Use

To mount the speaker on the wall

Caution:

zBe very careful to prevent the speaker [1.75 kg (3.86 lbs.)] from falling when mounting on the wall.

zBefore mounting, check the wall strength. (Do not put on the veneer plaster or whitewashed wall. The speaker may fall.) If unsure, consult a qualified service technician.

zMounting screws are not supplied. Use appropriate ones.

zCheck all wall mount angle screws for looseness.

zSelect a good location. If not, accidents may occur or the speaker may get damaged.

zSHARP is not responsible for accidents resulting from improper installation.

„Driving screws

SHARP designed the speakers so you may hang them on the wall. Use proper screws (not supplied). See below for size and type.

 

3.2 mm (1/8")

5 mm

 

(3/16")

9 mm (3/8" )

 

Min. 22 mm (7/8" )

„Wall mount angle fixed to the wall (Horizontal position)

1Fix the pattern paper to the wall in horizontal position as below.

509 mm

44 mm

29 mm

Wall surface 44 mm

29 mm

Pattern paper

 

2Make a hole on the wall following the screw point marks on the pattern paper by using a drill.

32 mm (1-1/4")

8-9 mm (3/8")

Wall surface

3Fix a wall mount plug into the hole using a hammer, until it is flush with the wall surface.

32 mm (1-1/4")

E-7

8-9 mm (3/8")

Wall surface

HT-SB200_EN-UK_rev4.fm

2008 December 17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents HT-SB200 Dichiarazione di conformità Advertencia Iii Vorsicht Entsorgungsinformationen für Benutzer aus Privathaushalten Información sobre la eliminación Vii Viii Informationen zur Batterieentsorgung Informazioni sullo smaltimento della batteria Contents FeaturesAccessories English IntroductionPrecautions „ Volume control„ General Controls and indicators „ Front Panel„ Rear Panel „ Remote Control TV Operation Buttons Only Sharp TVTighten all spikes as shown Attach foot cushions as shown„ Driving screws „ Wall mount angle fixed to the wall Horizontal positionTo mount the speaker on the wall „ Installing the speaker Placing the speaker Falling preventionDVD player Speaker connections to TVs „ Connecting to a TV with Headphone Socket„ Connecting to a TV Tuner receiving for other audio system„ Using with the AC/DC adaptor AC power connectionRemote control „ Battery installation„ Volume auto fade-in „ Test of the remote control„ To turn the power on General control„ Subwoofer level control „ Preset sound mode„ Muting „ Bass controlSymptom Possible cause Troubleshooting chart„ If problem occurs If such a problem occurs, do the following„ Cleaning the cabinet MaintenanceError indicators and warnings Display MeaningSpecifications Down
Related manuals
Manual 20 pages 44.11 Kb

HT-SB200 specifications

The Sharp HT-SB200 is a soundbar designed to enhance your audio experience, particularly when watching movies or listening to music. With its sleek design and modern aesthetics, the HT-SB200 not only serves as a functional audio solution but also complements any home entertainment setup.

One of the standout features of the HT-SB200 is its powerful audio performance. Equipped with a built-in subwoofer, this soundbar delivers rich bass and clear sound across various frequencies. The subwoofer enhances the overall audio quality, making action scenes in movies more immersive and music sound more vibrant. The total power output of the soundbar is impressive, ensuring that you can fill the room with high-quality sound without distortion at higher volumes.

The HT-SB200 also incorporates advanced audio technologies that contribute to its impressive performance. Dolby Audio technology is utilized to create an enveloping sound experience. This feature allows for a more dynamic soundstage, making it feel as if you are in the center of the action. The soundbar is designed to optimize audio playback from various sources, providing clarity and detail to dialogue and sound effects.

Connectivity is another strong point of the Sharp HT-SB200. It offers multiple input options, including HDMI ARC, optical, and analog connections. This versatility makes it easy to connect to a wide range of devices, from TVs and gaming consoles to set-top boxes. Additionally, the presence of Bluetooth connectivity allows for wireless streaming from smartphones, tablets, and other Bluetooth-compatible devices, giving you the freedom to enjoy your favorite content without being tethered by cables.

The user-friendly design of the HT-SB200 also features an intuitive remote control, allowing you to easily navigate settings, adjust volume, and switch between audio sources. This convenience enhances the overall user experience, ensuring that you can focus on your audio enjoyment without unnecessary complications.

Moreover, the compact size of the HT-SB200 makes it an ideal addition to smaller living spaces where traditional home theater systems may be too bulky. Its slim profile allows it to fit seamlessly beneath most televisions, without taking up much room.

In summary, the Sharp HT-SB200 soundbar is a remarkable audio solution that combines powerful sound performance, advanced audio technologies, versatile connectivity, and a compact design, making it a valuable addition to any home entertainment system. Whether you're a movie enthusiast or a music lover, the HT-SB200 aims to elevate your auditory experience.
Top Page Image Contents