3. SAFETY PRECAUTIONS
Failure to comply with any of the following safety procedures could result in serious injury. Please read the instructions carefully and keep for future reference.
1.Only a licensed electrician should install wiring and outlet for the laminator.
2.Ensure the unit is plugged into a properly grounded outlet with the correct voltage.
3.Keep hands and clothing (i.e. Neckties) away from the roller. The rollers have pinch points that can trap body parts or clothing and cause serious injury.
4.Keep flammable and wet objects away from the machine.
5.Place machine on a level surface.
6.Avoid excessive sunlight, humidity and extreme temperatures.
7.Ensure the unit is turned off, cooled, and unplugged from the outlet prior to moving and/or repairing.
8.Keep out of reach of children.
9.Only Royal Sovereign authorized maintenance and service technicians should make repairs.
10.Do not attempt to laminate items that exceed total recommended material thickness for the unit
11.When cleaning the machine, don't use flammable sprays or materials.
12.Do not touch the rollers when they are hot or place foreign objects inside the machine.
13.Do not cover the surface of the machine until the machine has completely cooled.
4.PARTS
1.
2.
3. TENSION CONTROL KNOB.
4. TOP HOT ROLLER.
5. FRONT FEED TABLE.
6. CONTROL PANEL.
7. SAFETY SHIELD.
8. PRESSURE LEVER.
4
5. CONTROL PANEL
< TEMPERATURE >
This button is for changing the temperature of upper and lower rollers.
Press the up button to increase temperature or the down button to decrease temperature.
[range 20 oC(68 °F) through 150 oC(302 °F)]
< SPEED >
This button is used to change the speed of the rollers. (Settings 1 - 9)
< T-CHECK >
To check current upper and lower roller temperature.
Display automatically returns to previous settings after 5 blinks.
< REVERSE >
This button is used to reverse the rollers to undo jams and correct misfed documents.
< RUN/STOP >
This button is used to Run and Stop the machine.
5