Royal Sovereign Maintenance, Trouble Shooting Guide, Specifications, Description RSH-380

Page 7

10.MAINTENANCE

1.Do not apply any cleaning fluids to the rollers, certain fluids may cause damage.

2.Do not clean rollers with sharp objects, use a rubber gum eraser to clean resin off of the rollers.

3.Use a damp cloth with only water to clean the body of the machine.

4.Store machine in a dry clean area.

11. TROUBLE SHOOTING GUIDE

 

Symptom

Possible Cause

Possible Solution

 

 

 

 

 

 

 

Rollers do not operate

1.Safety cover is opened.

1. Check to make sure the

 

 

safety cover is closed.

 

 

 

 

 

after the RUN/STOP

 

 

 

2. Power cord is not

 

 

 

button is pressed

2. Check the power cord.

 

 

plugged in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Roller is not heating

Call your authorized

Call your authorized dealer

 

 

 

dealer

 

 

 

 

 

 

 

 

 

1. Film tension is

1. Adjust film tension by

 

 

 

unbalanced.

 

 

 

rotating tension handle

 

 

Result of lamination is

 

 

 

2. lower idler bar is not

 

 

 

waved.

2. Push idler bar up

 

 

located in proper

 

 

 

 

 

 

 

 

 

 

position

 

 

 

 

 

 

 

 

Result of lamination is

1. Temperature is lower or

1. Adjust speed and

 

 

temperature

 

 

speed is higher than

 

 

not clear

 

 

 

 

 

recommended

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RSH-380

12. SPECIFICATIONS

Description

 

 

 

 

RSH-380

 

 

 

 

 

 

 

Power supply

 

 

AC 100, 200, 220

240V 50/60Hz 120V 60Hz

 

 

 

 

 

 

 

Power consumption

 

 

 

1500W

 

 

 

 

 

 

 

 

 

Max laminating width

 

 

 

380mm / 15"

 

 

 

 

 

 

 

 

 

Film thickness

 

 

 

25~250 mic / 1~10mil

 

 

 

 

 

 

 

 

Max laminating speed

 

 

5m/min / 16.4ft/min

 

 

 

 

 

 

 

 

 

 

Ready time

 

 

 

 

8min

 

 

 

 

 

 

 

 

 

Heating method

 

 

 

Hot roller

 

 

 

 

 

 

 

 

 

 

Driving motor

 

 

 

 

DC geared

 

 

 

 

 

 

 

 

Max temperature control

 

 

150 OC / 302 OF

 

 

 

 

 

 

 

 

 

 

Speed control

 

 

 

 

9 settings

 

 

 

 

 

 

 

 

 

 

Transport type

 

 

 

 

4 Roller

 

 

 

 

 

 

 

 

 

 

Film core size

 

 

 

 

1", 2.25", 3"

 

 

 

 

 

 

 

 

 

 

Cross cutter

 

 

 

 

Yes

 

 

 

 

 

 

 

 

 

 

Hot lamination

 

 

 

 

Yes

 

 

 

 

 

 

 

 

 

Mounting thickness

 

 

 

6mm / 0.24"

 

 

 

 

 

 

 

 

 

 

Reverse

 

 

 

 

Yes

 

 

 

 

 

 

 

 

 

 

Unit dimensions (w

d

h)

550

690

605(mm) / 21.5"

27"

24"

 

 

 

 

 

 

 

 

Unit weight

 

 

 

 

45kg / 99 Ibs

 

 

 

 

 

 

 

 

 

 

Carton dimensions (w

d

h)

800

750

650(mm) / 31.5"

29.5"

25,5"

 

 

 

 

 

 

 

 

Carton weight

 

 

 

 

57kg / 126 Ibs

 

 

 

 

 

 

 

 

 

 

12

13

Image 7
Contents Royal Sovereign International Inc WarrantyTable of Contents Parts Safety PrecautionsControl Panel Thermal Film Loading & Threading Film Loading & ThreadingOperating Instructions Before LaminatingUsing Cross Cutter Recommended Temperature and Speed SettingsDescription RSH-380 MaintenanceTrouble Shooting Guide Specifications
Related manuals
Manual 7 pages 57.45 Kb